Loading...
HomeMy WebLinkAboutSD-19-07 - Supplemental - 1200 Airport Drive (21)Introduction The WST LED is designed with the specifier in mind. The traditional, trapezoidal shape offers a soft, non-pixilated light source for end-user visual comfort. For emergency egress lighting, the WST LED offers six battery options, including remote. For additional code compliance and energy savings, there is also a Bi-level motion sensor option. With so many standard and optional features, three lumen packages, and high LPW, the WST LED is your “go to” luminaire for most any application. NOTES 1 MVOLT driver operates on any line voltage from 120-277V (50/60 Hz). Specify 120, 208, 240 or 277 options only when ordering with photocell (PE), fusing (SF, DF), or dual switching (DS). 2 Top conduit entry standard. 3 Not available with BBW. 4 Not available with PE, PER, PER5, PER7, VG or WG. 5 Not available with MVOLT option. Button photocell (PE) can be ordered with a dedicated voltage option. Single fuse (SF) requires 120, 277 or 347 voltage option. Double fuse (DF) requires 208, 240 or 480 voltage option.” 6 Not available with E7WH, E7WC, E7WHR, E20WC, E20WH, or E23WHR. Used with inverter system. Not available with 347/480V. Not available with PE, PER, PER5 & PER7. 7 Not available with 347/480V. 8 Battery pack rated for -20° to 40°C. 9 Comes with PBBW. 10 Warranty period is 3-years. WST LED Series Performance Package Color temperature Distribution Voltage Mounting Options Finish (required) WST LED P1 1,500 Lumen package P2 3,000 Lumen package P3 6,000 Lumen package 27K 2700 K 30K 3000 K 40K 4000 K 50K 5000 K VF Visual comfort forward throw VW Visual comfort wide MVOLT 1 120 1 208 1 240 1 277 1 347 480 Shipped included (blank)Surface mounting bracket Shipped separately BBW Surface- mounted back box PBBW Premium surface- mounted back box2 LCE Left side conduit entry3 RCE Right side conduit entry3 PE Photoelectric cell, button type PER NEMA twist-lock receptacle only PER5 Five-wire receptacle only PER7 Seven-wire receptacle only PIR Motion/Ambient Light Sensor, 8-15' mounting height4 PIR1FC3V Motion/ambient sensor, 8-15' mounting height, ambient sensor enabled at 1fc4 PIRH 180° motion/ambient light sensor, 15-30' mounting height4 PIRH1FC3V Motion/ambient sensor, 15-30' mounting height, ambient sensor enabled at 1fc4 SF Single fuse (120, 277, 347V)5 DF Double fuse (208, 240, 480V)5 DS Dual switching6 E7WH Emergency battery backup (7W)7 E7WC Emergency battery backup (cold, 7W)7,8 E7WHR Remote emergency battery backup (remote 7W)7,9 E20WH Emergency battery backup (20W)7,10 E20WC Emergency battery backup (cold, 20W)7,8,10 E23WHR Remote emergency battery backup (remote 20W)7,9 Shipped separately RBPW Retrofit back plate VG Vandal guard WG Wire guard DDBXD Dark bronze DBLXD Black DNAXD Natural aluminum DWHXD White DSSXD Sandstone DDBTXD Textured dark bronze DBLBXD Textured black DNATXD Textured natu- ral aluminum DWHGXD Textured white DSSTXD Textured sandstone WST LED Architectural Wall Sconce Luminaire Ordering Information EXAMPLE: WST LED P1 40K VF MVOLT DDBTXD Catalog Number Notes Type Height:8-1/2” (21.59 cm) Width:17” (43.18 cm) Depth:10-3/16” (25.9 cm) Weight: 20 lbs (9.1 kg) One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • www.lithonia.com © 2011-2016 Acuity Brands Lighting, Inc. All rights reserved. Hit the Tab key or mouse over the page to see all interactive elements. Optional Back Box (BBW) Height:4” (10.2 cm) Width:5-1/2” (14.0 cm) Depth:1-1/2” (3.8 cm) Specifications WST-LED Rev. 06/21/16 4.45 3.0 DFOR 3/4" NPT SIDE-ENTRY H W FOR 1/4" MOUNTING BOLTS H The emergency battery backup is integral to the luminaire - no external housing required! This design provides reliable emergency operation while maintaining the aesthetics of the product. All emergency backup configurations include an independent secondary driver with an integral relay to immediately detect AC power loss, meeting interpretations of NFPA 70/NEC 2008 - 700.16 The emergency battery will power the luminaire for a minimum duration of 90 minutes (maximum duration of three hours) from the time supply power is lost, per International Building Code Section 1006 and NFPA 101 Life Safety Code Section 7.9, provided luminaires are mounted at an appropriate height and illuminate an open space with no major obstructions. The examples below show illuminance of 1 fc average and 0.1 fc minimum of the P1 power package and VF distribution product in emergency mode. 10' x 10' Gridlines 8' and 12' Mounting Height Emergency Battery Operation 8' MH 12' MH Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown, within the tolerances allowed by Lighting Facts. Performance Package System Watts (MVOLT1) Dist. Type 27K (2700K, 70 CRI) 30K (3000K, 70 CRI) 40K (4000K, 70 CRI) 50K (5000K, 70 CRI) Lumens B U G LPW Lumens B U G LPW Lumens B U G LPW Lumens B U G LPW P1 12W VF 1,494 0 0 0 125 1,529 0 0 0 127 1,639 0 0 0 137 1,639 0 0 0 137 VW 1,513 0 0 0 126 1,548 0 0 0 129 1,660 0 0 0 138 1,660 0 0 0 138 P2 25W VF 3,162 1 0 1 126 3,236 1 0 1 129 3,468 1 0 1 139 3,468 1 0 1 139 VW 3,202 1 0 0 128 3,277 1 0 0 131 3,512 1 0 0 140 3,512 1 0 0 140 P3 50W VF 6,023 1 0 1 120 6,164 1 0 1 123 6,607 1 0 1 132 6,607 1 0 1 132 VW 6,100 1 0 1 122 6,242 1 0 1 125 6,691 1 0 1 134 6,691 1 0 1 134 Performance Data One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • www.lithonia.com © 2011-2016 Acuity Brands Lighting, Inc. All rights reserved. Lumen Output Use these factors to determine relative lumen output for average ambient temperatures from 0-40°C (32-104°F). Lumen Ambient Temperature (LAT) Multipliers Ambient Lumen Multiplier 0°C 32°F 1.03 10°C 50°F 1.02 20°C 68°F 1.01 25°C 77°F 1.00 30°C 86°F 0.99 40°C 104°F 0.98 Projected LED Lumen Maintenance Values calculated according to IESNA TM-21-11 methodology and valid up to 40°C. Operating Hours 0 25,000 50,000 100,000 Lumen Maintenance Factor 1.0 >0.95 >0.92 >0.87 WST-LED Rev. 06/21/16 Current (A) Performance package System Watts 120 208 240 277 347 480 P1 11 0.1 0.06 0.05 0.04 ------ 14 ------------0.04 0.03 P1 DS 14 0.12 0.07 0.06 0.06 ------ P2 25 0.21 0.13 0.11 0.1 ------ 30 ------------0.09 0.06 P2 DS 25 0.21 0.13 0.11 0.1 ------ P3 50 0.42 0.24 0.21 0.19 ------ 56 ------------0.16 0.12 P3 DS 52 0.43 0.26 0.23 0.21 ------ Electrical Load WST LED P1 27K VF MVOLT E7WH WST LED P2 40K VF MVOLT E20WH 8' MH 12' MH To see complete photometric reports or download .ies files for this product, visit Lithonia Lighting’s WST LED homepage. 0 0 11 22 33 44 -1 -2 -3 -4 1 2 3 40 0 11 22 33 44 -1 -2 -3 -4 1 2 3 4 Photometric Diagrams FEATURES & SPECIFICATIONS INTENDED USE The classic architectural shape of the WST LED was designed for applications such as hospitals, schools, malls, restaurants, and commercial buildings. The long life LEDs and driver make this luminaire nearly maintenance-free. CONSTRUCTION The single-piece die-cast aluminum housing integrates secondary heat sinks to optimize thermal transfer from the internal light engine heat sinks and promote long life. The driver is mounted in direct contact with the casting for a low operating temperature and long life. The die-cast door frame is fully gasketed with a one-piece solid silicone gasket to keep out moisture and dust, providing an IP65 rating for the luminaire. FINISH Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage process ensures a minimum 3 mils thickness for a finish that can withstand extreme climate changes without cracking or peeling. Standard Super Durable colors include dark bronze, black, natural aluminum, sandstone and white. Available in textured and non-textured finishes. OPTICS Well crafted reflector optics allow the light engine to be recessed within the luminaire, providing visual comfort, superior distribution, uniformity, and spacing in wall-mount applications. The WST LED has zero uplight and qualifies as a Nighttime Friendly™ product, meaning it is consistent with the LEED® and Green Globes™ criteria for eliminating wasteful uplight. ELECTRICAL Light engine(s) consist of 98 high-efficacy LEDs mounted to a metal core circuit board and integral aluminum heat sinks to maximize heat dissipation and promote long life (100,000 hrs at 40°C, L87). Class 2 electronic driver has a power factor >90%, THD <20%. Easily- serviceable surge protection device meets a minimum Category B (per ANSI/IEEE C62.41.2). INSTALLATION A universal mounting plate with integral mounting support arms allows the fixture to hinge down for easy access while making wiring connections. LISTINGS CSA certified to U.S. and Canadian standards. Luminaire is IP65 rated. PIR options are rated for wet location. Rated for -30°C to 40°C ambient. DesignLights Consortium® (DLC) Premium qualified product. Not all versions of this product may be DLC Premium qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified. WARRANTY 5-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx. Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice. One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • www.lithonia.com © 2011-2016 Acuity Brands Lighting, Inc. All rights reserved. Isofootcandle plots for the WST LED P3 40K VF and VW. Distances are in units of mounting height (10’). LEGEND 0.1 fc 0.5 fc 1.0 fc 5.0 fc Test No. 30965P32 tested in accordance with IESNA LM-79-08.4 3 2 1 0 -4 -3 -2 -1 4 3 2 1 0 4321 VF Test No. 31115P32 tested in accordance with IESNA LM-79-08.4 3 2 1 0 -4 -3 -2 -1 4 3 2 1 0 4321 VW Distribution overlay comparison to 175W metal halide. LEGEND WST LED, 0.5 fc WST HID, 0.5 fc 10’ W Sidewalk LLDs: WST HID = 0.72 WST LED = 0.95 WST LED P3 40K VF, WST 175M FT Probe, 12’ Mounting Ht WST HID: 213W WST LED: 50W WST-LED Rev. 06/21/16 One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • Fax: 770.918.1209 • www.lithonia.com © 2011-2015 Acuity Brands Lighting, Inc. All rights reserved. DSX1-LED Rev. 10/27/15 Page 1 of 4 D-Series Size 1LED Area Luminaire Catalog Number Notes Type Introduction The modern styling of the D-Series is striking yet unobtrusive - making a bold, progressive statement even as it blends seamlessly with its environment. The D-Series distills the benefits of the latest in LED technology into a high performance, high efficacy, long-life luminaire. The outstanding photometric performance results in sites with excellent uniformity, greater pole spacing and lower power density. It is ideal for replacing 100 – 400W metal halide in pedestrian and area lighting applications with typical energy savings of 65% and expected service life of over 100,000 hours. Hit the Tab key or mouse over the page to see all interactive elements. L H L H WW Ordering Information EXAMPLE: DSX1 LED 60C 1000 40K T3M MVOLT SPA DDBXD DSX1LED Series LEDs Drive current Color temperature Distribution Voltage Mounting DSX1 LED Forward optics 30C 30 LEDs (one engine) 40C 40 LEDs (two engines) 60C 60 LEDs (two engines) Rotated optics 1 60C 60 LEDs (two engines) 530 530 mA 700 700 mA 1000 1000 mA (1 A) 30K 3000 K 40K 4000 K 50K 5000 K AMBPC Amber phosphor converted 2 T1S Type I Short T2S Type II Short T2M Type II Medium T3S Type III Short T3M Type III Medium T4M Type IV Medium TFTM Forward Throw Medium T5VS Type V Very Short T5S Type V Short T5M Type V Medium T5W Type V Wide MVOLT 3 120 3 208 3 240 3 277 3 347 4 480 4 Shipped included SPA Square pole mounting RPA Round pole mounting WBA Wall bracket SPUMBA Square pole universal mounting adaptor 5 RPUMBA Round pole universal mounting adaptor 5 Shipped separately KMA8 DDBXD U Mast arm mounting bracket adaptor (specify finish) 6 Specifications EPA:1.2 ft2 (0.11 m2) Length:33” (83.8 cm) Width:13” (33.0 cm) Height:7-1/2” (19.0 cm) Weight (max):27 lbs (12.2 kg) NOTES 1 Rotated optics available with 60C only. 2 AMBPC only available with 530mA or 700mA. 3 MVOLT driver operates on any line voltage from 120-277V (50/60 Hz). Specify 120V, 208V, 240V or 277V options only when ordering with fusing (SF, DF options). 4 Not available with single board, 530mA product (30C 530 or 60C 530 DS). Not available with BL30, BL50 or PNMT options. 5 Available as a separate combination accessory: PUMBA (finish) U; 1.5 G vibration load rating per ANCI C136.31. 6 Must be ordered as a separate accessory; see Accessories information. For use with 2-3/8” mast arm (not included). 7 Photocell ordered and shipped as a separate line item from Acuity Brands Controls. See accessories. Not available with DS option. 8 If ROAM® node required, it must be ordered and shipped as a separate line item from Acuity Brands Controls. Not available with DCR. 9 DMG option for 347V or 480V requires 1000mA. 10 Specifies a ROAM® enabled luminaire with 0-10V dimming capability; PER option required. Additional hardware and services required for ROAM® deployment; must be purchased separately. Call 1-800-442-6745 or email: sales@roamservices. net. N/A with DS, PER5, PER7, BL30, BL50 or PNMT options. AccessoriesOrdered and shipped separately. For more control options, visit DTL and ROAM online. Controls & Shields DLL127F 1.5 JU Photocell - SSL twist-lock (120-277V) 20 DLL347F 1.5 CUL JU Photocell - SSL twist-lock (347V) 20 DLL480F 1.5 CUL JU Photocell - SSL twist-lock (480V) 20 SC U Shorting cap 20 DSX1HS 30C U House-side shield for 30 LED unit DSX1HS 40C U House-side shield for 40 LED unit DSX1HS 60C U House-side shield for 60 LED unit PUMBA DDBXD U*Square and round pole universal mounting bracket (specify finish) KMA8 DDBXD U Mast arm mounting bracket adaptor (specify finish) 6 11 Requires 40C or 60C. Provides 50/50 luminaire operation via two independent drivers on two separate circuits. N/A with PER, DCR, WTB, PIR or PIRH. 12 Requires an additional switched circuit. 13 PIR and PIR1FC3V specify the SensorSwitch SBGR-10-ODP control; PIRH and PIRH1FC3V specify the SensorSwitch SBGR-6-ODP control; see Motion Sensor Guide for details. Dimming driver standard. Not available with PER5 or PER7. Ambient sensor disabled when ordered with DCR. Separate on/off required. 14 Dimming driver standard. MVOLT only. Not available with 347V, 480V, DCR, DS, PER5, PER7 or PNMT options. 15 Dimming driver standard. MVOLT only. Not available with 347V, 480V, DCR, DS, PER5, PER7, BL30 or BL50. 16 Also available as a separate accessory; see Accessories information. 17 WTB not available with DS. 18 Single fuse (SF) requires 120V, 277V or 347V. Double fuse (DF) requires 208V, 240V or 480V. 19 Available with 60 LEDs (60C option) only. 20 Requires luminaire to be specified with PER option. Ordered and shipped as a separate line item from Acuity Brands Controls. Control options Other options Finish (required) Shipped installed PER NEMA twist-lock receptacle only (no controls) 7 PER5 Five-wire receptacle only (no controls) 7,8 PER7 Seven-wire receptacle only (no controls) 7,8 DMG 0-10V dimming driver (no controls) 9 DCR Dimmable and controllable via ROAM® (no controls) 10 DS Dual switching 11,12 PIR Motion/ambient sensor, 8-15’ mounting height, ambient sensor enabled at 5fc 13 PIRH Motion/ambient sensor, 15-30’ mounting height, ambient sensor enabled at 5fc 13 PIR1FC3V Motion/ambient sensor, 8-15’ mounting height, ambient sensor enabled at 1fc13 PIRH1FC3V Motion/ambient sensor, 15-30’ mounting height, ambient sensor enabled at 1fc13 BL30 Bi-level switched dimming, 30% 12,14 BL50 Bi-level switched dimming, 50% 12,14 PNMTDD3 Part night, dim till dawn 15 PNMT5D3 Part night, dim 5 hrs 15 PNMT6D3 Part night, dim 6 hrs 15 PNMT7D3 Part night, dim 7 hrs 15 Shipped installed HS House-side shield 16 WTB Utility terminal block 17 SF Single fuse (120, 277, 347V) 18 DF Double fuse (208, 240, 480V) 18 L90 Left rotated optics 19 R90 Right rotated optics 19 DDBXD Dark bronze DBLXD Black DNAXD Natural aluminum DWHXD White DDBTXD Textured dark bronze DBLBXD Textured black DNATXD Textured natural aluminum DWHGXD Textured white One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • Fax: 770.918.1209 • www.lithonia.com © 2011-2015 Acuity Brands Lighting, Inc. All rights reserved. DSX1-LED Rev. 10/27/15 Page 2 of 4 Visit Lithonia Lighting’s POLES CENTRAL to see our wide selection of poles, accessories and educational tools. *Round pole top must be 3.25” O.D. minimum. **For round pole mounting (RPA) only. DSX1 shares a unique drilling pattern with the AERIS™ family. Specify this drilling pattern when specifying poles, per the table below. DM19AS Single unit DM29AS 2 at 90° * DM28AS 2 at 180° DM39AS 3 at 90° * DM49AS 4 at 90° * DM32AS 3 at 120° ** Example: SSA 20 4C DM19AS DDBXD Tenon O.D.Single Unit 2 at 180°2 at 90°3 at 120°3 at 90°4 at 90° 2-3/8”AST20-190 AST20-280 AST20-290 AST20-320 AST20-390 AST20-490 2-7/8”AST25-190 AST25-280 AST25-290 AST25-320 AST25-390 AST25-490 4”AST35-190 AST35-280 AST35-290 AST35-320 AST35-390 AST35-490 Tenon Mounting Slipfitter ** Drilling Top of Pole 0.563” 2.650” 1.325”0.400”(2 PLCS) Template #8 To see complete photometric reports or download .ies files for this product, visit Lithonia Lighting’s D-Series Area Size 1 homepage. Photometric Diagrams Isofootcandle plots for the DSX1 LED 60C 1000 40K. Distances are in units of mounting height (20’). LEGEND 0.1 fc 0.5 fc 1.0 fc Test No. LTL23222 tested in accordance with IESNA LM-79-08.Test No. LTL23271 tested in accordance with IESNA LM-79-08.Test No. LTL23211 tested in accordance with IESNA LM-79-08.4 3 2 1 0 -4 -3 -2 -1 4 3 2 1 0 4321 Test No. LTL23164B tested in accordance with IESNA LM-79-08.4 3 2 1 0 -4 -3 -2 -1 4 3 2 1 0 4321 4 3 2 1 0 -4 -3 -2 -1 4 3 2 1 0 4321 4 3 2 1 0 -4 -3 -2 -1 4 3 2 1 0 4321 T1S T3M T4M T5W Performance Data Current (A) Number of LEDs Drive Current (mA) System Watts 120 208 240 277 347 480 30 530 52 0.52 0.30 0.26 0.23 ---- 700 68 0.68 0.39 0.34 0.30 0.24 0.17 1000 105 1.03 0.59 0.51 0.45 0.36 0.26 40 530 68 0.67 0.39 0.34 0.29 0.23 0.17 700 89 0.89 0.51 0.44 0.38 0.31 0.22 1000 138 1.35 0.78 0.67 0.58 0.47 0.34 60 530 99 0.97 0.56 0.48 0.42 0.34 0.24 700 131 1.29 0.74 0.65 0.56 0.45 0.32 1000 209 1.98 1.14 0.99 0.86 0.69 0.50 Electrical Load Use these factors to determine relative lumen output for average ambient temperatures from 0-40°C (32-104°F). Lumen Ambient Temperature (LAT) Multipliers Ambient Lumen Multiplier 0°C 32°F 1.02 10°C 50°F 1.01 20°C 68°F 1.00 25°C 77°F 1.00 30°C 86°F 1.00 40°C 104°F 0.99 Projected LED Lumen Maintenance Data references the extrapolated performance projections for the platforms noted in a 25°C ambient, based on 10,000 hours of LED testing (tested per IESNA LM-80-08 and projected per IESNA TM-21-11). To calculate LLF, use the lumen maintenance factor that corresponds to the desired number of operating hours below. For other lumen maintenance values, contact factory. Operating Hours 0 25,000 50,000 100,000 Lumen Maintenance Factor DSX1 LED 60C 1000 1.0 0.98 0.96 0.91 DSX1 LED 60C 700 1.0 0.99 0.99 0.99 Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown, within the tolerances allowed by Lighting Facts. Contact factory for performance data on any configurations not shown here. LEDs Drive Current (mA) System Watts Dist. Type 30K (3000 K, 70 CRI) 40K (4000 K, 70 CRI) 50K (5000 K, 70 CRI) AMBPC (Amber Phosphor Converted) Lumens B U G LPW Lumens B U G LPW Lumens B U G LPW Lumens B U G LPW 30C (30 LEDs) 700 mA 68 W T1S 7,554 1 0 1 111 8,112 2 0 2 119 8,163 2 0 2 120 4,561 1 0 1 67 T2S 7,789 2 0 2 115 8,364 2 0 2 123 8,416 2 0 2 124 4,777 1 0 1 70 T2M 7,610 1 0 2 112 8,172 2 0 2 120 8,223 2 0 2 121 4,622 1 0 2 68 T3S 7,601 1 0 2 112 8,162 2 0 2 120 8,213 2 0 2 121 4,724 1 0 1 69 T3M 7,670 1 0 2 113 8,236 2 0 2 121 8,288 2 0 2 122 4,701 1 0 2 69 T4M 7,774 1 0 2 114 8,348 2 0 2 123 8,400 2 0 2 124 4,709 1 0 2 69 TFTM 7,658 1 0 2 113 8,223 1 0 2 121 8,275 1 0 2 122 4,638 1 0 2 68 T5VS 8,090 2 0 0 119 8,687 3 0 1 128 8,742 3 0 1 129 4,922 2 0 0 72 T5S 8,150 2 0 0 120 8,751 3 0 0 129 8,806 3 0 0 130 4,863 2 0 0 72 T5M 8,164 3 0 1 120 8,767 3 0 2 129 8,821 3 0 2 130 4,924 3 0 1 72 T5W 8,044 3 0 1 118 8,638 3 0 2 127 8,692 3 0 2 128 4,787 3 0 1 70 1000 mA 105 W T1S 10,331 2 0 2 98 11,094 2 0 2 106 11,163 2 0 2 106 T2S 10,652 2 0 2 101 11,438 2 0 2 109 11,510 2 0 2 110 T2M 10,408 2 0 2 99 11,176 2 0 3 106 11,246 2 0 3 107 T3S 10,395 2 0 2 99 11,163 2 0 2 106 11,233 2 0 2 107 T3M 10,490 2 0 2 100 11,264 2 0 2 107 11,335 2 0 2 108 T4M 10,632 2 0 2 101 11,417 2 0 2 109 11,488 2 0 2 109 TFTM 10,473 2 0 2 100 11,247 2 0 3 107 11,317 2 0 3 108 T5VS 11,064 3 0 1 105 11,881 3 0 1 113 11,955 3 0 1 114 T5S 11,145 3 0 1 106 11,968 3 0 1 114 12,043 3 0 1 115 T5M 11,165 3 0 2 106 11,989 4 0 2 114 12,064 4 0 2 115 T5W 11,001 3 0 2 105 11,813 4 0 2 113 11,887 4 0 2 113 40C (40 LEDs) 700 mA 89 W T1S 9,984 2 0 2 112 10,721 2 0 2 120 10,788 2 0 2 103 6,014 1 0 1 68 T2S 10,294 2 0 2 116 11,054 2 0 2 124 11,123 2 0 2 106 6,299 2 0 2 71 T2M 10,059 2 0 2 113 10,801 2 0 3 121 10,869 2 0 3 104 6,094 2 0 2 68 T3S 10,046 2 0 2 113 10,788 2 0 2 121 10,855 2 0 2 103 6,229 1 0 2 70 T3M 10,137 2 0 2 114 10,886 2 0 2 122 10,954 2 0 2 104 6,198 2 0 2 70 T4M 10,275 2 0 2 115 11,033 2 0 2 124 11,102 2 0 2 106 6,209 1 0 2 70 TFTM 10,122 2 0 2 114 10,869 2 0 2 122 10,937 2 0 2 104 6,115 1 0 2 69 T5VS 10,693 3 0 1 120 11,482 3 0 1 129 11,554 3 0 1 110 6,490 2 0 0 73 T5S 10,771 3 0 1 121 11,566 3 0 1 130 11,639 3 0 1 111 6,411 2 0 0 72 T5M 10,790 3 0 2 121 11,587 4 0 2 130 11,659 4 0 2 111 6,492 3 0 1 73 T5W 10,632 3 0 2 119 11,417 4 0 2 128 11,488 4 0 2 109 6,311 3 0 2 71 1000 mA 138 W T1S 13,655 2 0 2 99 14,663 3 0 3 106 14,754 3 0 3 107 T2S 14,079 2 0 2 102 15,118 3 0 3 110 15,212 3 0 3 110 T2M 13,756 2 0 3 100 14,772 3 0 3 107 14,864 3 0 3 108 T3S 13,739 2 0 2 100 14,754 2 0 2 107 14,846 3 0 3 108 T3M 13,864 2 0 2 100 14,888 3 0 3 108 14,981 3 0 3 109 T4M 14,052 2 0 2 102 15,090 3 0 3 109 15,184 3 0 3 110 TFTM 13,842 2 0 3 100 14,864 2 0 3 108 14,957 2 0 3 108 T5VS 14,623 3 0 1 106 15,703 4 0 1 114 15,801 4 0 1 115 T5S 14,731 3 0 1 107 15,818 3 0 1 115 15,917 3 0 1 115 T5M 14,757 4 0 2 107 15,846 4 0 2 115 15,945 4 0 2 116 T5W 14,540 4 0 2 105 15,614 4 0 2 113 15,711 4 0 2 114 60C (60 LEDs) 700 mA 131 W T1S 14,694 2 0 2 106 15,779 3 0 3 114 15,877 3 0 3 115 8,952 2 0 2 68 T2S 15,150 3 0 3 110 16,269 3 0 3 118 16,370 3 0 3 119 9,377 2 0 2 72 T2M 14,803 2 0 3 107 15,896 3 0 3 115 15,995 3 0 3 116 9,072 2 0 2 69 T3S 14,785 2 0 2 107 15,877 3 0 3 115 15,976 3 0 3 116 9,273 2 0 2 71 T3M 14,919 2 0 2 108 16,021 3 0 3 116 16,121 3 0 3 117 9,227 2 0 2 70 T4M 15,122 2 0 2 110 16,238 3 0 3 118 16,340 3 0 3 118 9,243 2 0 2 71 TFTM 14,896 2 0 3 108 15,996 2 0 3 116 16,096 2 0 3 117 9,103 2 0 2 69 T5VS 15,736 3 0 1 114 16,898 4 0 1 122 17,004 4 0 1 123 9,661 3 0 1 74 T5S 15,852 3 0 1 115 17,022 4 0 1 123 17,129 4 0 1 124 9,544 3 0 1 73 T5M 15,880 4 0 2 115 17,052 4 0 2 124 17,159 4 0 2 124 9,665 3 0 2 74 T5W 15,647 4 0 2 113 16,802 4 0 2 122 16,907 4 0 2 123 9,395 4 0 2 72 1000 mA 209 W T1S 20,095 3 0 3 96 21,579 3 0 3 103 21,714 3 0 3 104 T2S 20,720 3 0 3 99 22,249 3 0 3 106 22,388 3 0 3 107 T2M 20,245 3 0 3 97 21,740 3 0 3 104 21,876 3 0 3 105 T3S 20,220 3 0 3 97 21,713 3 0 3 104 21,849 3 0 3 105 T3M 20,404 3 0 3 98 21,910 3 0 4 105 22,047 3 0 4 105 T4M 20,681 3 0 3 99 22,207 3 0 4 106 22,346 3 0 4 107 TFTM 20,372 3 0 3 97 21,876 3 0 4 105 22,013 3 0 4 105 T5VS 21,521 4 0 1 103 23,110 4 0 1 111 23,254 4 0 1 111 T5S 21,679 4 0 1 104 23,280 4 0 1 111 23,425 4 0 1 112 T5M 21,717 4 0 2 104 23,321 5 0 3 112 23,466 5 0 3 112 T5W 21,399 4 0 3 102 22,979 5 0 3 110 23,122 5 0 3 111 One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • Fax: 770.918.1209 • www.lithonia.com © 2011-2015 Acuity Brands Lighting, Inc. All rights reserved. DSX1-LED Rev. 10/27/15 Page 3 of 4 Performance Data Lumen Output One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • Fax: 770.918.1209 • www.lithonia.com © 2011-2015 Acuity Brands Lighting, Inc. All rights reserved. DSX1-LED Rev. 10/27/15 Page 4 of 4 FEATURES & SPECIFICATIONS INTENDED USE The sleek design of the D-Series Size 1 reflects the embedded high performance LED technology. It is ideal for many commercial and municipal applications, such as parking lots, plazas, campuses, and streetscapes. CONSTRUCTION Single-piece die-cast aluminum housing has integral heat sink fins to optimize thermal management through conductive and convective cooling. Modular design allows for ease of maintenance and future light engine upgrades. The LED driver is mounted in direct contact with the casting to promote low operating temperature and long life. Housing is completely sealed against moisture and environmental contaminants (IP65). Low EPA (1.2 ft2) for optimized pole wind loading. FINISH Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage process ensures a minimum 3 mils thickness for a finish that can withstand extreme climate changes without cracking or peeling. Available in both textured and non-textured finishes. OPTICS Precision-molded proprietary acrylic lenses are engineered for superior area lighting distribution, uniformity, and pole spacing. Light engines are available in standard 4000 K (70 minimum CRI) or optional 3000 K (70 minimum CRI) or 5000 K (70 CRI) configurations. The D-Series Size 1 has zero uplight and qualifies as a Nighttime FriendlyTM product, meaning it is consistent with the LEED® and Green GlobesTM criteria for eliminating wasteful uplight. ELECTRICAL Light engine configurations consist of 30, 40 or 60 high-efficacy LEDs mounted to metal-core circuit boards to maximize heat dissipation and promote long life (up to L96/100,000 hours at 25°C). Class 1 electronic drivers are designed to have a power factor >90%, THD <20%, and an expected life of 100,000 hours with <1% failure rate. Easily serviceable 10kV or 6kV surge protection device meets a minimum Category C Low operation (per ANSI/IEEE C62.41.2). INSTALLATION Included mounting block and integral arm facilitate quick and easy installation. Stainless steel bolts fasten the mounting block securely to poles and walls, enabling the D-Series Size 1 to withstand up to a 3.0 G vibration load rating per ANSI C136.31. The D-Series Size 1 utilizes the AERISTM series pole drilling pattern. Optional terminal block, tool-less entry, and NEMA photocontrol receptacle are also available. LISTINGS UL Listed for wet locations. Light engines are IP66 rated; luminaire is IP65 rated. Rated for -40°C minimum ambient. U.S. Patent No. D672,492 S. International patent pending. DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org to confirm which versions are qualified. WARRANTY 5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice.