Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
SP-22-006 - Supplemental - 1459 Shelburne Road (16)
SlimSurface is a 5/8" thick LED surface mounted luminaire with the appearance of a recessed downlight. Easy to install into most standard j-boxes, the SlimSurface round apertures are available as a 5" 650 lm, 7" 1000 lm and 10" 2200 lm fixture. Project: Location: Cat.No: Type: Lamps: Qty: Notes: SlimSurface-5in-7in-10in-Round-S5R-S7R-S10R 11/18 page 1 of 9 Downlighting SlimSurface LED S5R, S7R & S10R Round 5", 7" and 10" Apertures Ordering guide example: S5R830K7AL Series CRI CCT Lumens Finish Dimming S5R SlimSurface 5" Round 8 80 9 90 1 27K 2700K 30K 3000K 35K 3500K 40K 4000K 7 650 lm — White AL Aluminum BK Black blank ELV / Triac (120V) W White AL AluminumBK Black Z10U 0-10V (120V-277V) S7R SlimSurface 7" Round 8 809 90 1 27K 2700K30K 3000K35K 3500K40K 4000K 10 1000 lm — WhiteAL AluminumBK Black blank ELV / Triac (120V) W WhiteAL AluminumBK Black Z10U 0-10V (120V-277V) S10R SlimSurface 10" Round 2 8 80 9 90 1 27K 2700K 30K 3000K 35K 3500K 40K 4000K 22 2200 lm W White AL Aluminum BK Black MT Metallic blank ELV / Triac (120V) Z10U 0-10V (120V-277V) 1. Configurations using 90 CRI are only available with 2700K & 3000K CCT. 2. IMPORTANT: SlimSurface LED 10" round installs into 4-11/16" J-box (not wet location listed). Features 1. Flange: One piece plastic flange. Injection molded white, applied aluminum or black. 2. Lens: High transmittance lens allowing for smooth, comfortable light pattern. 3. Power supply: Integral class 2 driver. Factory wired electronic LED driver (see Electrical section for specifications) 4. LED Strip: Utilizes LEDs. 5. Lifetime: Expected lifetime 50,000 hours and backed by a 5-year warranty* 6. Compliance: Non-conductive fixture for shower light application (not applicable to metal trim model). Dimming Intended for ELV/Triac (120V) or 0-10V dimming (120V-277V) based on the configuration. Min 90°C supply conductors. Electrical Electronic power supply: RoHS compliant. Class 2 power unit. Unit tolerates sustained open and short circuit output conditions without damage. Labels cULus listed. ENERGY STAR® certified. All models are damp location rated for walls or ceilings. The 5" & 7" are suitable for ceiling mount wet locations when installed per instructions. White Black Aluminum Metal Electrical specifications Dimming Input volts Input frequency Input current Input Power THD Factor Power Factor Minimum Operating Temp. Slim 5" 650lm Triac 120V 50/60Hz 0.08A 9.5W <15%>0.9 -20°C 0-10V 120V 50/60Hz 0.09A 10.1W <20%>0.9 -20°C 277V 50/60Hz 0.04A 10.2W <20%>0.9 -20°C Slim 7" 1000lm Triac 120V 50/60Hz 0.13A 14.2W <15%>0.9 -20°C 0-10V 120V 50/60Hz 0.12A 14.4W <20%>0.9 -20°C 277V 50/60Hz 0.06A 14.7W <20%>0.9 -20°C Slim 10" 2200lm Triac 120V 50/60Hz 0.20A 23.2W <20%>0.9 -20°C 0-10V 120V 50/60Hz 0.20A 23.2W <10%>0.95 -20°C 277V 50/60Hz 0.09A 24.6W <15%>0.95 -20°C Fore more details, please see LED-DIM-DL spec sheet. * See Philips.com/warranties for warranty details. Note: A 2 1/8" deep octagon junction box is recommended for through circuit wiring applications. S5R, S7R & S10R SlimSurface LED Round 5", 7" and 10" Apertures SlimSurface-5in-7in-10in-Round-S5R-S7R-S10R 11/18 page 2 of 9 Compatibility (5" & 7" Round) Installs into standard J-box applications for 5" & 7" models: 3 1/2" round (plastic)4" square (plastic) Not compatible with S5R 4" octagonal (metal)4" square (metal) Not compatible with S5R Fire rated J-box Fire rated classification is per the ceiling and junction box ratings. Dimensions SlimSurface LED 5" downlight Ø 5 38"137 mm Ø 4 12"115 mm 5 8"16 mm Ø 5 38" 137 mm Ø 5 38"137 mm Ø 4 12"115 mm 5 8"16 mm Ø 5 38" 137 mm Ø 5 38"137 mm Ø 4 12"115 mm 5 8"16 mm Ø 5 38" 137 mm Ø 7 78" 201 mm Ø 7 78"201 mm Ø 7"179 mm 58"16 mm Ø 7 78" 201 mm Ø 7 78"201 mm Ø 7"179 mm 58"16 mm SlimSurface LED 10" downlight Ø 10 58" 269 mm Ø 10 58"269 mm Ø 9 5 8"244 mm 58"16 mm Ø 10 58" 269 mm Ø 10 58"269 mm Ø 9 5 8"244 mm 58"16 mm Ø 10 58" 269 mm Ø 10 58"269 mm Ø 9 5 8"244 mm 58"16 mm SlimSurface LED 7" downlight Ø 7 78" 201 mm Ø 7 78"201 mm Ø 7"179 mm 58"16 mm Compatibility (10" Round) Install into 4-11/16" J-box: 4 11/16" square (metal) Compatible with S10R only S5R, S7R & S10R SlimSurface LED Round 5", 7" and 10" Apertures SlimSurface-5in-7in-10in-Round-S5R-S7R-S10R 11/18 page 3 of 9 75 150 225 300 375 60° 30° Candela Curves 75 150 225 Angle Mean CP Lumens 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 266 263 261 260 254 239 217 190 160 118 81 55 40 30 23 18 11 4 0 25 736 110 118 91 51 31 18 5 Zonal lumens & percentages Zone Lumens %Luminaire 0-300-400-600-90 208326469522 39.8%62.5%89.7%100.0% Coefficients of utilization Ceiling 80%70% 50%30%0% Wall 70 50 30 10 50 10 50 10 50 10 0 RCR Zonal cavity method - Effective floor reflectance = 20%Room Cavity Ratio012345678910 1191111029588827671676359 119107968678716459545047 119103907970635751474340 119100857364575146423835 116105948476706458545046 11698847364575146413835 111100908274686257534945 11195827263565045413834 10697877972666056514844 10692807062565045413734 10088776760534843393633 Single unit data Height to Lighted Plane Initial center beam foot-candles Beam dia. (ft)* 5'6'7'8'9' 117543 6.0'7.2'8.4'9.6'10.8' * Beam diameter is where foot-candles drop to 50% of maximum. Multiple unit data - RCR 2 Spacing on center Initial center beam foot-candles Watts per sq.ft. 5'6'7'8'9' 21.814.210.28.56.8 0.400.260.190.160.13 38'x38'x10' Room, Workplane 2.5' above floor, 80/50/20% Reflectances S5R927K7 • 10 W LED, 90 CRI, 2700 K 1. Tested using absolute photometry as specified in LM79: IESNA Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products. 2. Wattage: controlled to within 5% 3. Correlated Color Temperature: within specs as defined in ANSI_NEMA_ANSLG C78.377-2008: Specifications for the Chromaticity of Solid State Lighting Products. 150 300 450 600 750 60° 30° Candela Curves 150 300 45050 Angle Mean CP Lumens 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 496 490 479 464 433 391 348 309 265 197 135 92 68 51 40 30 21 9 0 46 130 180 193 152 85 52 32 10 Zonal lumens & percentages Zone Lumens %Luminaire 0-300-400-600-90 356549786880 40.5%62.4%89.3%100.0% Coefficients of utilization Ceiling 80%70% 50%30%0% Wall 70 50 30 10 50 10 50 10 50 10 0 RCR Zonal cavity method - Effective floor reflectance = 20%Room Cavity Ratio012345678910 1191111029588827671676359 119107968678716559555147 119103907970635752474340 119100857465575146423835 116104948577706459545047 11698847364575146423835 111100908274686257534946 11195827263565146423835 10696877972666156524845 10692807162565045413835 10088776760534843393633 Single unit data Height to Lighted Plane Initial center beam foot-candles Beam dia. (ft)* 5'6'7'8'9' 20141086 5.5'6.6'7.7'8.8'9.9' * Beam diameter is where foot-candles drop to 50% of maximum. Multiple unit data - RCR 2 Spacing on center Initial center beam foot-candles Watts per sq.ft. 5'6'7'8'9' 21.814.210.28.56.8 2.891.901.351.130.90 38'x38'x10' Room, Workplane 2.5' above floor, 80/50/20% Reflectances S7R927K10 • 14 W LED, 90 CRI, 2700 K CRI and CCT adjustment factors 90 CRI 2700K =84% 80 CRI 2700K =100% 80 CRI 3000K =100% 80 CRI 3500K =105% 80 CRI 4000K =109% CRI and CCT adjustment factors 90 CRI 2700K =84% 80 CRI 2700K =100% 80 CRI 3000K =100% 80 CRI 3500K =105% 80 CRI 4000K =109% Report1: 1053GFR Output lumens: Spacing Criterion: Beam Angle: Input Watts2: 523 lms 1.2 87° 9.1 W Efficacy: CCT3: CRI: 57.4 lm/w 2700 K 90 min Report1: 962GFR Output lumens: Spacing Criterion: Beam Angle: Input Watts2: 880 lms 1.1 83° 13.5 W Efficacy: CCT3: CRI: 65.2 lm/w 2700 K 90 min S5R, S7R & S10R SlimSurface LED Round 5", 7" and 10" Apertures SlimSurface-5in-7in-10in-Round-S5R-S7R-S10R 11/18 page 4 of 9 75 150 225 300 375 60° 30° Candela Curves 75 150 225 Angle Mean CP Lumens 051015202530354045505560657075808590 2942912892882812652412111781319162453426201340 28 81 121 131 102 57 34 21 5 Zonal lumens & percentages Zone Lumens %Luminaire 0-30 0-40 0-60 0-90 231 362 521 581 39.7% 62.3% 89.6% 100.0% Coefficients of utilization Ceiling 80%70% 50%30%0% Wall 70 50 30 10 50 10 50 10 50 10 0 RCR Zonal cavity method - Effective floor reflectance = 20%Room Cavity Ratio0 1 2 3 4 5 6 7 8 9 10 119 111 102 95 88 82 76 71 67 63 59 119 107 96 86 78 71 64 59 54 50 47 119 103 90 79 70 63 57 51 47 43 40 119 100 85 73 64 57 51 46 42 38 35 116 105 94 84 76 70 64 58 54 50 46 116 105 94 84 76 70 64 58 54 50 46 111 100 90 82 74 68 62 57 53 49 45 111 95 82 72 63 56 50 45 41 38 34 106 97 87 79 72 66 60 56 51 48 44 106 92 80 70 62 56 50 45 41 37 34 100 88 77 67 60 53 48 43 39 36 33 Single unit data Height to Lighted Plane Initial center beam foot-candles Beam dia. (ft)* 5' 6' 7' 8' 9' 12 8 6 5 4 6.0' 7.2' 8.4' 9.6' 10.8' * Beam diameter is where foot-candles drop to 50% of maximum. Multiple unit data - RCR 2 Spacing on center Initial center beam foot-candles Watts per sq.ft. 5' 6' 7' 8' 9' 24.2 15.8 11.3 9.5 7.5 2.77 1.82 1.30 1.08 0.87 38'x38'x10' Room, Workplane 2.5' above floor, 80/50/20% Reflectances S5R827K7 • 10 W LED, 80 CRI, 2700 K 150 300 450 600 750 60° 30° Candela Curves 150 300 450 60600 Angle Mean CP Lumens 051015202530354045505560657075808590 6256186045845464944403903372501701178565513927120 59 164 227 244 193 108 65 41 13 Zonal lumens & percentages Zone Lumens %Luminaire 0-30 0-40 0-60 0-90 449 693 994 1113 40.4% 62.3% 89.3% 100.0% Coefficients of utilization Ceiling 80%70% 50%30%0% Wall 70 50 30 10 50 10 50 10 50 10 0 RCR Zonal cavity method - Effective floor reflectance = 20%Room Cavity Ratio0 1 2 3 4 5 6 7 8 9 10 119 111 102 95 88 82 76 71 67 63 59 119 107 96 86 78 71 65 59 55 51 47 119 103 90 79 70 63 57 52 47 43 40 119 100 85 74 65 57 51 46 42 38 35 116 104 94 85 77 70 64 59 54 50 47 116 98 84 73 64 57 51 46 42 38 35 111 100 90 82 74 68 62 57 53 49 46 111 95 82 72 63 56 51 46 42 38 35 106 96 87 79 72 66 61 56 52 48 45 106 92 80 71 62 56 50 45 41 38 35 100 88 77 67 60 53 48 43 39 36 33 Single unit data Height to Lighted Plane Initial center beam foot-candles Beam dia. (ft)* 5' 6' 7' 8' 9' 25 17 13 10 8 5.5' 6.6' 7.7' 8.8' 9.9' * Beam diameter is where foot-candles drop to 50% of maximum. Multiple unit data - RCR 2 Spacing on center Initial center beam foot-candles Watts per sq.ft. 5' 6' 7' 8' 9' 24.2 15.8 11.3 9.5 7.5 3.68 2.42 1.73 1.44 1.15 38'x38'x10' Room, Workplane 2.5' above floor, 80/50/20% Reflectances S7R827K10 • 14 W LED, 80 CRI, 2700 K CRI and CCT adjustment factors 90 CRI 2700K =84% 80 CRI 2700K =100% 80 CRI 3000K =100% 80 CRI 3500K =105% 80 CRI 4000K =109% CRI and CCT adjustment factors 90 CRI 2700K =84% 80 CRI 2700K =100% 80 CRI 3000K =100% 80 CRI 3500K =105% 80 CRI 4000K =109% Report1: 1054GFR Output lumens:Spacing Criterion:Beam Angle:Input Watts2: 581 lms1.287°9.3 W Efficacy:CCT3: CRI: 62.5 lm/w2700 K80 min Report1: 964GFR Output lumens:Spacing Criterion:Beam Angle:Input Watts2: 1113 lms1.183°13.4 W Efficacy:CCT3: CRI: 83.1 lm/w2700 K80 min S5R, S7R & S10R SlimSurface LED Round 5", 7" and 10" Apertures SlimSurface-5in-7in-10in-Round-S5R-S7R-S10R 11/18 page 5 of 9 75 150 225 300 375 60° 30° Candela Curves 75 150 225 300300 Angle Mean CP Lumens 0 5 1015202530354045505560657075808590 31931531331330629026423119714610069503829221560 30 88 131 142 109 62 37 22 6 Zonal lumens & percentages Zone Lumens %Luminaire 0-300-400-600-90 249391562628 39.7%62.3%89.6%100.0% Coefficients of utilization Ceiling 80%70% 50%30%0% Wall 70 50 30 10 50 10 50 10 50 10 0 RCR Zonal cavity method - Effective floor reflectance = 20%Room Cavity Ratio012345678910 1191111029588827671676359 119107968678716459545047 1191039079706357514743 40 119 100 85 73 64 57 51 46 42 38 35 116 105 94 84 76 70 64 58 54 50 46 116 98 84 73 64 57 51 46 41 38 35 111 100 90 82 74 68 62 57 53 49 45 111 95 82 72 63 56 50 45 41 38 34 106 97 87 79 72 66 60 56 51 48 44 106 92 80 70 62 56 50 45 41 37 34 100 88 77 67 60 53 48 43 39 36 33 Single unit data Height to Lighted Plane Initial center beam foot-candles Beam dia. (ft)* 5'6'7'8'9' 139754 6.0'7.2'8.4'9.6'10.8' * Beam diameter is where foot-candles drop to 50% of maximum. Multiple unit data - RCR 2 Spacing on center Initial center beam foot-candles Watts per sq.ft. 5'6'7'8'9' 26.217.112.210.28.1 3.062.011.431.190.96 38'x38'x10' Room, Workplane 2.5' above floor, 80/50/20% Reflectances S5R830K7 • 10 W LED, 80 CRI, 3000 K 150 300 450 600 750 60° 30° Candela Curves 150 300 450 6 Angle Mean CP Lumens 0 5 1015202530354045505560657075808590 6076015885685314804273793282431651138363493726120 57 159 221 237 187 105 63 39 13 Zonal lumens & percentages Zone Lumens %Luminaire 0-300-400-600-90 4376749661081 40.4%62.3%89.4%100.0% Coefficients of utilization Ceiling 80%70% 50%30%0% Wall 70 50 30 10 50 10 50 10 50 10 0 RCR Zonal cavity method - Effective floor reflectance = 20%Room Cavity Ratio012345678910 1191111029588827671676359 119107968678716559555147 1191039079706357524743 40 119 100 85 74 65 57 51 46 42 38 35 116 104 94 85 77 70 64 59 54 50 47 116 98 84 73 64 57 51 46 42 38 35 111 100 90 82 74 68 62 57 53 49 46 111 95 82 72 63 56 51 46 42 38 35 106 96 87 79 72 66 61 56 52 48 45 106 92 80 71 62 56 50 45 41 38 35 100 88 77 67 60 53 48 43 39 36 33 Single unit data Height to Lighted Plane Initial center beam foot-candles Beam dia. (ft)* 5'6'7'8'9' 24171297 5.5'6.6'7.7'8.8'9.9' * Beam diameter is where foot-candles drop to 50% of maximum. Multiple unit data - RCR 2 Spacing on center Initial center beam foot-candles Watts per sq.ft. 5'6'7'8'9' 26.217.112.210.28.1 3.552.331.661.391.11 38'x38'x10' Room, Workplane 2.5' above floor, 80/50/20% Reflectances S7R830K10 • 14 W LED , 80 CRI, 3000 K CRI and CCT adjustment factors 90 CRI 2700K =84% 80 CRI 2700K =100% 80 CRI 3000K =100% 80 CRI 3500K =105% 80 CRI 4000K =109% CRI and CCT adjustment factors 90 CRI 2700K =84% 80 CRI 2700K =100% 80 CRI 3000K =100% 80 CRI 3500K =105% 80 CRI 4000K =109% Report1: 1055GFR Output lumens: Spacing Criterion: Beam Angle:Input Watts2: 628 lms 1.287°9.1 W Efficacy:CCT3: CRI: 69.0 lm/w3000 K80 min Report1: 961GFR Output lumens: Spacing Criterion: Beam Angle:Input Watts2: 1081 lms 1.183°13.5 W Efficacy:CCT3: CRI: 80.0 lm/w3000 K80 min S5R, S7R & S10R SlimSurface LED Round 5", 7" and 10" Apertures SlimSurface-5in-7in-10in-Round-S5R-S7R-S10R 11/18 page 6 of 9 75 150 225 300 375 60° 30° Candela Curves 75 150 225 300 Angle Mean CP Lumens 0 5 1015202530354045505560657075808590 34734434134033231228324820915410774534131231550 33 96 143 155 119 68 41 25 7 Zonal lumens & percentages Zone Lumens %Luminaire 0-300-400-600-90 272426613685 39.6%62.2%89.5%100.0% Coefficients of utilization Ceiling 80%70% 50%30%0% Wall 70 50 30 10 50 10 50 10 50 10 0 RCR Zonal cavity method - Effective floor reflectance = 20%Room Cavity Ratio012345678910 1191111029588827671676359 119107968678716459545047 1191039079706357514743 40 119 100 85 73 64 57 51 46 42 38 35 116 105 94 84 76 70 64 58 54 50 46 116 98 84 73 64 57 51 46 41 38 35 111 100 90 82 74 68 62 57 53 49 45 111 95 82 72 63 56 50 45 41 38 34 111 95 82 72 63 56 50 45 41 38 34 106 92 80 70 62 56 50 45 41 37 34 100 88 77 67 60 53 48 43 39 36 33 Single unit data Height to Lighted Plane Initial center beam foot-candles Beam dia. (ft)* 5'6'7'8'9' 1410754 6.0'7.2'8.4'9.6'10.8' * Beam diameter is where foot-candles drop to 50% of maximum. Multiple unit data - RCR 2 Spacing on center Initial center beam foot-candles Watts per sq.ft. 5'6'7'8'9' 28.618.713.311.28.9 3.342.191.561.301.04 38'x38'x10' Room, Workplane 2.5' above floor, 80/50/20% Reflectances S5R835K7 • 10 W LED, 80 CRI, 3500 K 150 300 450 600 750 60° 30° Candela Curves 150 300 450 600600 Angle Mean CP Lumens 0 5 1015202530354045505560657075808590 6396326185975585054493993452551741208867524028120 60 167 232 249 197 111 67 42 13 Zonal lumens & percentages Zone Lumens %Luminaire 0-300-400-600-90 45970810161139 40.3%62.2%89.2%100.0% Coefficients of utilization Ceiling 80%70% 50%30%0% Wall 70 50 30 10 50 10 50 10 50 10 0 RCR Zonal cavity method - Effective floor reflectance = 20%Room Cavity Ratio012345678910 1191111029588827671676359 119107968678716559555147 1191039079706357524743 40 119 100 85 74 65 57 51 46 42 38 35 116 104 94 85 77 70 64 59 54 50 47 116 98 84 73 64 57 51 46 42 38 35 111 100 90 82 74 68 62 57 53 49 46 111 95 82 72 63 56 51 46 42 38 35 106 96 87 79 72 66 61 56 52 48 45 106 92 80 71 62 56 50 45 41 38 35 100 88 77 67 60 53 48 43 39 36 33 Single unit data Height to Lighted Plane Initial center beam foot-candles Beam dia. (ft)* 5'6'7'8'9' 261813108 5.5'6.6'7.7'8.8'9.9' * Beam diameter is where foot-candles drop to 50% of maximum. Multiple unit data - RCR 2 Spacing on center Initial center beam foot-candles Watts per sq.ft. 5'6'7'8'9' 28.618.713.311.28.9 3.742.451.751.461.17 38'x38'x10' Room, Workplane 2.5' above floor, 80/50/20% Reflectances S7R835K10 • 14 W LED, 80 CRI, 3500 K CRI and CCT adjustment factors 90 CRI 2700K =84% 80 CRI 2700K =100% 80 CRI 3000K =100% 80 CRI 3500K =105% 80 CRI 4000K =109% CRI and CCT adjustment factors 90 CRI 2700K =84% 80 CRI 2700K =100% 80 CRI 3000K =100% 80 CRI 3500K =105% 80 CRI 4000K =109% Report1: 1056GFR Output lumens: Spacing Criterion: Beam Angle:Input Watts2: 685 lms 1.287°9.1 W Efficacy:CCT3: CRI: 75.3 lm/w3500 K80 min Report1: 965GFR Output lumens: Spacing Criterion: Beam Angle:Input Watts2: 1139 lms 1.183°13.5 W Efficacy:CCT3: CRI: 84.4 lm/w3500 K80 min S5R, S7R & S10R SlimSurface LED Round 5", 7" and 10" Apertures SlimSurface-5in-7in-10in-Round-S5R-S7R-S10R 11/18 page 7 of 9 75 150 225 300 375 60° 30° Candela Curves 75 150 225 300 Angle Mean CP Lumens 0 5 1015202530354045505560657075808590 36636336035935032929926222116311379574434251660 35 101 151 163 126 72 44 27 7 Zonal lumens & percentages Zone Lumens %Luminaire 0-300-400-600-90 286450648726 39.5%62.0%89.3%100.0% Coefficients of utilization Ceiling 80%70% 50%30%0% Wall 70 50 30 10 50 10 50 10 50 10 0 RCR Zonal cavity method - Effective floor reflectance = 20%Room Cavity Ratio012345678910 1191111029588827671676359 119107968678716459545047 1191039079706357514743 40 119 100 85 73 64 57 51 46 42 38 35 116 105 94 84 76 70 64 58 54 50 46 116 98 84 73 64 57 51 46 41 38 35 111 100 90 82 74 68 62 57 53 49 45 111 95 82 72 63 56 50 45 41 38 34 106 97 87 79 72 66 60 56 51 48 44 106 92 80 70 62 56 50 45 41 37 34 100 88 77 67 60 53 48 43 39 36 33 Single unit data Height to Lighted Plane Initial center beam foot-candles Beam dia. (ft)* 5'6'7'8'9' 1510765 6.0'7.2'8.4'9.6'10.8' * Beam diameter is where foot-candles drop to 50% of maximum. Multiple unit data - RCR 2 Spacing on center Initial center beam foot-candles Watts per sq.ft. 5'6'7'8'9' 30.319.814.111.89.4 3.542.321.661.381.10 38'x38'x10' Room, Workplane 2.5' above floor, 80/50/20% Reflectances S5R840K7 • 10 W LED, 80 CRI, 4000 K 150 300 450 600 750 60° 30° Candela Curves 150 300 450 600 Angle Mean CP Lumens 0 5 1015202530354045505560657075808590 7107026866636205604994433822831931339774574430140 66 186 258 276 218 122 74 46 15 Zonal lumens & percentages Zone Lumens %Luminaire 0-300-400-600-90 51078611271262 40.4%62.3%89.3%100.0% Coefficients of utilization Ceiling 80%70% 50%30%0% Wall 70 50 30 10 50 10 50 10 50 10 0 RCR Zonal cavity method - Effective floor reflectance = 20%Room Cavity Ratio012345678910 1191111029588827671676359 119107968678716559555147 1191039079706357524743 40 119 100 85 74 65 57 51 46 42 38 35 116 104 94 85 77 70 64 59 54 50 47 116 98 84 73 64 57 51 46 42 38 35 111 100 90 82 74 68 62 57 53 49 46 111 95 82 72 63 56 51 46 42 38 35 106 96 87 79 72 66 61 56 52 48 45 106 92 80 71 62 56 50 45 41 38 35 100 88 77 67 60 53 48 43 39 36 33 Single unit data Height to Lighted Plane Initial center beam foot-candles Beam dia. (ft)* 5'6'7'8'9' 282014119 5.5'6.6'7.7'8.8'9.9' * Beam diameter is where foot-candles drop to 50% of maximum. Multiple unit data - RCR 2 Spacing on center Initial center beam foot-candles Watts per sq.ft. 5'6'7'8'9' 30.319.814.111.89.4 4.172.741.961.631.30 38'x38'x10' Room, Workplane 2.5' above floor, 80/50/20% Reflectances S7R840K10 • 14 W LED, 90 CRI, 2700 K CRI and CCT adjustment factors 90 CRI 2700K =84% 80 CRI 2700K =100% 80 CRI 3000K =100% 80 CRI 3500K =105% 80 CRI 4000K =109% CRI and CCT adjustment factors 90 CRI 2700K =84% 80 CRI 2700K =100% 80 CRI 3000K =100% 80 CRI 3500K =105% 80 CRI 4000K =109% Report1: 1057GFR Output lumens: Spacing Criterion: Beam Angle:Input Watts2: 726 lms 1.287°9.1 W Efficacy:CCT3: CRI: 79.8 lm/w4000 K80 min Report1: 963GFR Output lumens: Spacing Criterion: Beam Angle:Input Watts2: 1262 lms 1.183°13.4 W Efficacy:CCT3: CRI: 94.2 lm/w4000 K80 min S5R, S7R & S10R SlimSurface LED Round 5", 7" and 10" Apertures SlimSurface-5in-7in-10in-Round-S5R-S7R-S10R 11/18 page 8 of 9 200 400 600 800 1000 60° 30° Candela Curves 200 400 600 800 1000 Angle Mean CP Lumens 0 5 1015202530354045505560657075808590 102710171008992947871776685597459313223161122937046200 97 279 399 429 351 204 122 74 23 Zonal lumens & percentages Zone Lumens %Luminaire 0-300-400-600-90 775120317581977 39.2%60.9%88.9%100.0% Coefficients of utilization Ceiling 80%70% 50%30%0% Wall 70 50 30 10 50 10 50 10 50 10 0 RCR Zonal cavity method - Effective floor reflectance = 20%Room Cavity Ratio012345678910 1191111029588827671666259 119107958677706459545047 1191039079706256514643 39 119 100 85 73 64 56 50 45 41 37 34 116 104 93 84 76 69 63 58 53 49 46 116 98 84 72 63 56 50 45 41 37 34 111 100 90 81 74 67 61 57 52 48 45 111 95 82 71 63 56 50 45 41 37 34 106 96 87 79 71 65 60 55 51 47 44 106 92 80 70 62 55 49 45 41 37 34 100 88 76 67 59 53 47 43 39 35 32 Single unit data Height to Lighted Plane Initial center beam foot-candles Beam dia. (ft)* 5'6'7'8'9' 4129211613 5.5'6.6'7.7'8.8'9.9' * Beam diameter is where foot-candles drop to 50% of maximum. Multiple unit data - RCR 2 Spacing on center Initial center beam foot-candles Watts per sq.ft. 5'6'7'8'9' 83.454.839.132.626.1 1.040.680.490.410.33 38'x38'x10' Room, Workplane 2.5' above floor, 80/50/20% Reflectances S10R830K22 • 24 W LED, 80 CRI, 3000 K 1. Tested using absolute photometry as specified in LM79: IESNA Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products. 2. Wattage: controlled to within 5% 3. Correlated Color Temperature: within specs as defined in ANSI_NEMA_ANSLG C78.377-2008: Specifications for the Chromaticity of Solid State Lighting Products. Report1: S10R927K22BK Output lumens: Spacing Criterion: Beam Angle:Input Watts2: 1977 lms 1.187°23.5 W Efficacy:CCT3: CRI: 84.1 lm/w3000 K80 min 60° 30° 200 400 600 800 1000 Candela Curves 200 400 600 800 10001000 Angle Mean CP Lumens 0 5 1015202530354045505560657075808590 1000990981966922847754664579442300212153117896744200 94 271 388 416 339 195 117 71 22 Zonal lumens & percentages Zone Lumens %Luminaire 0-300-400-600-90 754117017031913 39.4%61.2%89.0%100.0% Coefficients of utilization Ceiling 80%70% 50%30%0% Wall 70 50 30 10 50 10 50 10 50 10 0 RCR Zonal cavity method - Effective floor reflectance = 20%Room Cavity Ratio012345678910 1191111029588827671676259 119107958677706459545047 1191039079706256514743 39 119 100 85 73 64 57 51 45 41 38 35 116 104 94 84 76 69 63 58 54 50 46 116 98 84 72 64 56 50 45 41 38 34 111 100 90 81 74 67 62 57 52 49 45 111 95 82 71 63 56 50 45 41 37 34 106 96 87 79 72 65 60 55 51 48 44 106 92 80 70 62 55 50 45 41 37 34 100 88 76 67 59 53 47 43 39 35 32 Single unit data Height to Lighted Plane Initial center beam foot-candles Beam dia. (ft)* 5'6'7'8'9' 4028201612 5.5'6.6'7.7'8.8'9.9' * Beam diameter is where foot-candles drop to 50% of maximum. Multiple unit data - RCR 2 Spacing on center Initial center beam foot-candles Watts per sq.ft. 5'6'7'8'9' 80.853.037.931.625.2 1.060.700.500.410.33 38'x38'x10' Room, Workplane 2.5' above floor, 80/50/20% Reflectances S10R835K22 • 24 W LED, 80 CRI, 3500 K Report1: 963GFR Output lumens: Spacing Criterion: Beam Angle:Input Watts2: 1913 lms 1.187°23.9 W Efficacy:CCT3: CRI: 80.0 lm/w3500 K80 min © 2019 Signify Holding. All rights reserved. This document may be subject to change. No representation or warranty as to the accuracy or completeness of the information included herein is given and any liability for any action in reliance thereon is disclaimed. All trademarks are owned by Signify Holding or their respective owners. Signify North America Corporation 200 Franklin Square Drive, Somerset, NJ 08873 Telephone 855-486-2216 Signify Canada Ltd. 281 Hillmount Road, Markham, ON, Canada L6C 2S3 Telephone 800-668-9008 www.lightolier.com S5R, S7R & S10R SlimSurface LED Round 5", 7" and 10" Apertures SlimSurface-5in-7in-10in-Round-S5R-S7R-S10R 11/18 page 9 of 9 160 320 480 640 800 60° 30° Candela Curves 160 320 480 640 Angle Mean CP Lumens 0 5 1015202530354045505560657075808590 79478878176973266959552545334423816211687664932130 75 216 307 328 265 149 87 52 15 Zonal lumens & percentages Zone Lumens %Luminaire 0-300-400-600-90 59892513391493 40.0%62.0%89.7%100.0% Coefficients of utilization Ceiling 80%70% 50%30%0% Wall 70 50 30 10 50 10 50 10 50 10 0 RCR Zonal cavity method - Effective floor reflectance = 20%Room Cavity Ratio012345678910 1191111039588827671676359 119107968678716559555147 1191039079706357514743 40 119 100 85 74 64 57 51 46 42 38 35 116 105 94 85 77 70 64 58 54 50 46 116 98 84 73 64 57 51 46 42 38 35 111 100 90 82 74 68 62 57 53 49 46 111 95 82 72 63 56 50 45 41 38 35 106 97 87 79 72 66 60 56 52 48 45 106 93 80 70 62 56 50 45 41 38 35 100 88 77 67 60 53 48 43 39 36 33 Single unit data Height to Lighted Plane Initial center beam foot-candles Beam dia. (ft)* 5'6'7'8'9' 3222161210 5.5'6.6'7.7'8.8'9.9' * Beam diameter is where foot-candles drop to 50% of maximum. Multiple unit data - RCR 2 Spacing on center Initial center beam foot-candles Watts per sq.ft. 5'6'7'8'9' 63.341.529.724.719.8 1.010.660.470.390.32 38'x38'x10' Room, Workplane 2.5' above floor, 80/50/20% Reflectances S10R927K22 • 23 W LED, 90 CRI, 2700 K Report1: S10R927K22BK Output lumens: Spacing Criterion: Beam Angle:Input Watts2: 1493 lms 1.186°22.8 W Efficacy:CCT3: CRI: 65.5 lm/w2700 K90 min 1. Tested using absolute photometry as specified in LM79: IESNA Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products. 2. Wattage: controlled to within 5% 3. Correlated Color Temperature: within specs as defined in ANSI_NEMA_ANSLG C78.377-2008: Specifications for the Chromaticity of Solid State Lighting Products. PRODUCT CODE 070457 PROJECT TYPE FOCUS+ ZERO SA Part number 070457 Lampholder:LED Wattage:10 W Finish:AN-96 / Iron gray / Textured Degree of protection:IP65 CRI:80 Kelvin:3000 Optic:Symmetric extra wide reflector Nema Type:7H x 6V Luminaire lumen output:630 lm L:L70 B:B10 Lifetime:35000 h cULus: Description Economical low-profile landscape flood light series. Fixtures consist of: - Multi-step powder-coat painting process, optimized against UV rays and corrosion. - Copper-free precision die-cast aluminum housing, ring/faceplate, and adjustable mounting arm. - Extra-clear, tempered, silk-screened, flat glass diffuser. - Custom molded, anti-aging gasket(s). - Custom MCPCB utilized to maximize heat dissipation and promote long LED life. - NEMA 7H x 6V light distribution (S/EW). - Input voltage: 120 V, integral D.O.B. module with surge protection up to 500 V. - Pre-wired factory sealed cable for external electrical connection included. - Standard robust ½” NPS knuckle mount with 180° adjustable swivel arm (SA versions) and rugged, locking teeth for a simplified installation. - Technopolymer ground spike accessory available for FOCUS+ ZERO (ordered separately). - Custom finishes (please specify RAL colour). - 5-year warranty. Photometric data Technical drawings Performance in Lighting - 2621 Keys Pointe - Conyers, Georgia 30013 - USA - voice 770.822.2115 - info.usa@pil.lighting www.performanceinlighting.com A BLE - -- C - D - E - F - G - H - I - J B - K Order Example: BLE - G - WHS16 - 600 - G22 - 980 - NA - ACR - 600 - NA - LED38 - 2700K - DL THE ORIGINAL™ integrated led SERIES SPS-0448 REV C A - MOUNTING STYLE B - SHADE SIZE D - MOUNTING (CONTINUED) C - SHADE FINISH THE ORIGINAL™: 150 Black 250 PORCELAIN FINISHES3: C - SHADE FINISH (CONTINUED) White 350 Vintage Green 355 Jadite 455 Cherry Red 550 Yellow 650 Bronze 750 Cobalt Blue D - MOUNTING CSA LISTED CORDS: CSGW Gold & White Cloth CSBG Black & Gold Cloth CSBB Black & Brown Cloth CSBW Black & White Cloth CSBP Black & Pink Cloth CSRW Red & White Cloth CSUW Blue & White Cloth CHAIN MOUNT OPTIONS2: CN48 4’ of Chain CN36 3’ of Chain CN60 5’ of Chain CN72 6’ of Chain WHS12 whs14 whs16 whs18 whs202 C Cord Hung CN Chain Hung F Flush Mount1F GooseneckG Stem MountS POWDER COAT FINISHES4: SBK Standard Black SWH Standard White CRZ Red Chevron Cloth CMG Grey ClothPOWDER COAT FINISHES4: 100 Black 105 106 Textured Black Matte Black 200 206 White Matte White 300 Dark Green 307 Emerald Green 370 Mint 380 Chartreuse 390 Teal 400 Barn Red 420 Orange 470 Watermelon 480 Blush Pink 490 Magenta 500 Buttery Yellow 570 Sunower 600 Bronze 601 Chocolate 605 Rust 615 Oil-Rubbed Bronze 700 Royal Blue 311 Jadite 850 Graphite 950 Metallic Chrome 765 Delphite Blue 495 Sherbet Orange JOB NAME:FIXTURE TYPE: - L 710 Cobalt Blue 705 Navy NATURAL METALS5: 995 Raw Copper 996 Weathered Copper 997 Raw Brass 998 Weathered Brass 999 Oil-Rubbed Copper 805 Charcoal Granite 975 Galvanized 810 Graphite 800 Industrial Grey 790 Lavender GOOSENECK OPTIONS: G11 G12 G13 G1 G2 G3 G25 G26 G32 G15 G162 G17 G22 G6 G7 G8 G9 G10 G14 G5 G35 G36 G64 G34 G46 G24 G65 E - MOUNTING FINISH STEM MOUNT OPTIONS: ST506 .5” Stem Mount, 6” ST512 .5” Stem Mount, 12” ST518 .5” Stem Mount, 18” ST536 .5” Stem Mount, 36” ST524 .5” Stem Mount, 24” ST548 .5” Stem Mount, 48” ST724 .75” Stem Mount, 24” ST712 .75” Stem Mount, 12” ST718 .75” Stem Mount, 18” ST706 .75” Stem Mount, 6” ST736 .75” Stem Mount, 36” ST748 .75” Stem Mount, 48” 980 Brushed Aluminum NA Not Applicable F - CORDS7 Please Note: See Section D for all applicable CSA Listed Cord Options CSB Black Cloth CSW White Cloth CSR Red Cloth i - MOUNTING ACCESSORY NA None/Not Applicable HSC Hang Straight Canopy2,10 LDBPC LED Decorative Backing Plate Cover LDCHX LED Decorative Backing Plate Cover & Hex Cover 715 Delphite Blue j - LIGHT SOURCE k - COLOR TEMPERATURE 2700K 2700K, Warm White 3000K 3000K, Neutral White 4000K 4000K, Cool White 3500K 3500K, Bright White LED11 850 Lumen, 11W LED LED16 1250 Lumen, 16W LED LED27 2000 Lumen, 27W LED LED38 3000 Lumen, 38W LED LED43 4000 Lumen, 43W LED l - LED LENS DL Domed Lens FL Flat Lens IMPORTANT: (1) Not available with Acrylic Diffuser shade accessory (2) Not available in Natural Metals (3) All Porcelain Enamel finished shades feature a white interior and a black outer rim (4) All Powder Coat finished shades, Galvanized excluded, feature a white interior (5) Natural Metals have a longer estimated manufacturing time, please check the website for exact lead time. There are no returns accepted on Natural Metals (6) Not compatible with 16” shade size and larger (7) Only applicable if Chain Hung Mounting Style selected in Section A, select NA if another Mounting Style is selected (8) Acrylic Diffuser limits the maximum lumen selection as well as reduces lumens delivered and LPW. Selection Limits: 2000 Max for 12” and 14“ shades; 3000 Max for 16” through 20“ shades (9) Fixture is CSA Listed for Damp Location with Acrylic Diffuser (10) Only applicable if Stem Mounting Style is selected in Section A (11) Not available with G3, G4, G11, G15, G26, & G36 Gooseneck option (12) Only applicable if Gooseneck Mounting Style is selected in Section A Please Note: If Flush Mount [F] is selected in Section A, please select NA NA Not Applicable Please Note: Mounting Accessories below are only applicable with select Mounting Styles. Please refer to product listings on our website for further detail. Please Note: See Section C for Finish Options. 980-Brushed Aluminum is also available for Gooseneck (Except G36, G64 & G65) and Stem mounting styles. If a Porcelain shade finish is selected, mounting will be powder coat painted-to-match. Porcelain shade finishes are not available with a Natural Metal mounting finish (I) If Cord Hung [C], selection identifies canopy finish (II) If Chain Hung [CN] Mounting Style, selection identifies chain and canopy finish. Natural Metals are not applicable (III) If Stem Mount [S] Mounting Style, selection identifies stem and canopy finish (IV) If Flush Mount [F] Mounting Style, selection identifies hex coupler and canopy finish. Natural Metals are not applicable H - SHADE ACCESSORY FINISH NA Not Applicable Please Note: See Section C for Finish Options. Natural Metals not applicable. If Porcelain Finish is selected, accessory will be powder coat painted-to-match NA None WC Wire Cage G - SHADE ACCESSORIES2 ACR Acrylic Diuser 12” Shade 14” Shade 16” Shade 18” Shade 20” Shade 1Address: 320 Knox McRae Drive Titusville, FL 32780 Phone: (800) 407-8784 Email: sales@barnlight.com Website: www.barnlight.com MOUNTING style CHAIN HUNG PENDANT (CN) GOOSENECK (G) FLUSH MOUNT (F) luminaire dimensions A B WHS14 WHS16 14” 16” Diameter (B) 7.5” 7.75” Height (A) WHS12 12” 7” Shade Code WHS18 18” 8.5” WHS20 20” 9.25” SHOWN WITH: G22 Gooseneck Arm 6.7” 4” 6.2” 2.8” 0.675” CORD HUNG PENDANT (C) STEM MOUNT PENDANT (S) Canopy shown required if LED 11 & 16 Light Sourceselected in Section J VARIES 0.675” 6.2” 3.8” VARIES 6.2” 2.8” 0.675” Canopy shown required if LED 11 & 16 Light Source selected in Section J Canopy shown required if LED 11 & 16 Light Source selected in Section J VARIES 0.675” 6.2” 2.8” 6” 3.3” high lumen canopy for pendant & Flush Mount Required if LED 27, 38, 43 Light Source selected in Section J Canopy shown required if LED 11 & 16 Light Source selected in Section J 2 the oRIGINAL™ integrated led series SPS-0448 REV Cbarn light electric co. Address: 320 Knox McRae Drive Titusville, FL 32780 Phone: (800) 407-8784 Email: sales@barnlight.com Website: www.barnlight.com 3 the oRIGINAL™ integrated led series SPS-0448 REV Cbarn light electric co. Address: 320 Knox McRae Drive Titusville, FL 32780 Phone: (800) 407-8784 Email: sales@barnlight.com Website: www.barnlight.com LIGHT SOURCE All published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. Data is considered to be representative of the congurations shown, within the tolerances allowed by Lighting Facts. To obtain an IES le specic to your project, please contact the factory. LIGHT DISTRIBUTION LPWLumensLPWLumensLPWLumensLPWLumensLPWLumens 93399579299674199778124474846 90387276290472193676121272824 FLAT DOMED Optics 850 1250 2000 3000 4000 WHS12 LUMENS 11Wattage 16 27 38 43 FLAT LENS (FL)DOMED LENS (DL) Shown above with 16” Shade (WHS16), White Interior (200-White) and 3000 Lumen (LED38) Shown above with 16” Shade (WHS16), White Interior (200-White) and 3000 Lumen (LED38) WHS14 FLAT DOMED 92396478297373198277124374845 88380875285671190475121072823 Shown above with 20” Shade (WHS20), White Interior (200-White) and 3000 Lumen (LED38) Shown above with 20” Shade (WHS20), White Interior (200-White) and 3000 Lumen (LED38) 92396478297373198277124374845 88380575285470190275120972822 FLAT DOMEDWHS16 WHS18 FLAT DOMED 92395678296773197877124074843 88379175284370189575120472819 WHS20 FLAT DOMED 91394578295973197377123774841 87377374283070188775119972815 *Acrylic Diuser option reduces lumens delivered and LPW 4 the oRIGINAL™ integrated led series SPS-0448 REV Cbarn light electric co. Address: 320 Knox McRae Drive Titusville, FL 32780 Phone: (800) 407-8784 Email: sales@barnlight.com Website: www.barnlight.com SPECIFICATIONS CERTIFICATIONs, LISTINGs & WARRANTY Made in the USAManufactured and Hand-Crafted in Our 60,000 Square Foot Facility Located in Titusville, FL CSA LISTED FOR WET LOCATIONSIncludes All Gooseneck, Stem and Flush Mounting StylesAcrylic Diuser is CSA Listed for Damp Locations for Gooseneck and Stem Mounting Styles CSA LISTED FOR DAMP LOCATIONSIncludes All Chain and Select Cord Hung Mounting StylesAcrylic Diuser is CSA Listed for Damp Locations for Chain and Cord Hung Mounting Styles LIMITED WARRANTYFor Additional Information on Our Limited Warranty, Please See Our Terms & Conditions operating temperature-30˚C to 40˚C construction & FINISH powder coat SHADEHand-Spun from High Purity 3003-O Temper Aluminum Galvanize SHADEHand Spun from High Quality Galvanized Steel PORCELAIN SHADE Hand-Spun from 20 Gauge Porcelain Steel POWDER COAT FINISHESPolyester Powder Coat Finishes Are Electro-Statically Applied and Thermocured PORCELAIN FINISHES Applied by Hand and Fired in a High Temperature Oven Copper Hand-Spun from High Purity C11000-O60 ETP Copper brass Hand-Spun from High Purity C2600-O60 Brass STem 1/2” Nominal (0.84” Actual) or 3/4” Nominal (1.05” Actual) Sch 40, 6063 Aluminum Mounting Stem. Custom Lengths Available upon Request. GOOSENECK 1/2” Nominal (0.84” Actual) or 3/4” Nominal (1.05” Actual) Sch 40, 6063 Aluminum Gooseneck cord Cord-Hung Pendants Include 7’ of Standard Cord or 5’ of Cloth Cord, +/- For Socket Orientation CHAIN 4-Gauge Chain Complete with Quick Link for On-Site Adjustments to Chain’s Length ELECTRICAL/LED DRIVER DRIVER TYPE: erp ess/t & esp/T POWER FACTOR > 0.9 Efficiency: Up to 87% Typical Input Voltage: 120-277 VAC (see dimming section) CLASS 2 Power SupplY LED DRIVER LIFETIME: > 100,000 Hours (@ 25 Deg C Ambient) IP64 Minimum Rating Case with silicone-Based Potting ProtectionsOutput Open Load, Over-Current and Short-Circuit (hiccup), and Over-Temperature with Auto Recovery CONDUCTED AND RADIATED EMICompliant with FCC CFR Title 47 Part 15 Class B (120 Vac), Class A (277 Vac) and EN55015 (CISPR 15) at 220, 230 and 240 Vac ComPLIANT WITHComplies with Energy Star® DLR (DesignLight Consortium®) and CA Title 24 Technical Requirements DIMMING Tri-mode Dimming™Compatible with TRIAC (forward-phase or leading-edge), ELV (reverse-phase or trailing-edge) and 0-10 V Dimmers Dimming Range 1-100%The Dimming Range Is Dependent on Each Specic Dimmer. May Not Be Able to Achieve 1% Dimming with Some Dimmers. TRIAC and ELV Dimming ONLY AT 120 VAC ELV DImming at 230 VACAvailable by Request COMPATIBLE DIMMERSConsult Factory for Additional Information on Dimming LED LIGHT SOURCE LED TYPE: cree lmh2 module INITIAL LUMENS DELIVERED: UP TO 4000 LUMENS L90(6K) > 36,300 HOURS AVAILABLE CCT: 2700K, 3000K, 3500K, 4000KCustom Temperatures Available upon Request 90+ CRI 2 Step MacAdams Ellipse Efficacy: Up to 93 LPWHigh Ecacy Available upon Request, Consult Factory forAdditional Information ECF-S_EcoForm_area_small 08/21 page 1 of 9 ECF-S EcoForm small Area luminaire Project: Location: Cat.No: Type: Lamps: Qty: Notes: Gardco EcoForm Gen-2 combines economy with performance in an LED area luminaire. Capable of delivering up to 27,800 lumens or more in a compact, low profile LED luminaire, EcoForm offers a new level of customer value. EcoForm features an innovative retrofit arm kit, simplifying site conversions to LED by eliminating the need to drill additional holes in most existing poles. Integral control systems available for further energy savings. Includes Service Tag, our innovative way to provide assistance throughout the life of the product. Ordering guide Prefix ECF-S Number of LEDs Drive Current LED Color - Generation Mounting Distribution Voltage ECF-S EcoForm site and area, small 32L 32 LEDs (2 modules) 48L 48 LEDs (3 modules) 64L 64 LEDs (4 modules) 365 365 mA 530 530 mA 700 700 mA 1A 1050 mA 1.2A 1200 mA 900 900 mA 1A 1050 mA 1.2A19 1200 mA 900 900 mA 1A19 1050 mA WW-G2 Warm White 3000K, 70 CRI Generation 2 NW-G2 Neutral White 4000K, 70 CRI Generation 2 CW-G2 Cool White 5000K, 70 CRI Generation 2 AR2 Arm Mount (standard) The following mounting kits must be ordered separately (See accessories) SF3 Slip Fitter Mount (fits to 2 3⁄8" O.D. tenon) WS Wall mount with surface conduit rear entry permitted RAM2 Retrofit arm mount kit Type 2 2 Type 2 2-90 Rotated left 90° 2-270 Rotated right 270° Type 3 3 Type 3 3-90 Rotated left 90° 3-270 Rotated right 270° Type 4 4 Type 4 4-90 Rotated left 90° 4-270 Rotated right 270° Type 5 5 Type 5 5W Type 5W AFR Auto Front Row AFR-90 Auto Front Row, Rotated left 90° AFR-270 Auto Front Row, Rotated right 270° BLC Back Light Control BLC-90 Back Light Control rotated at 90° BLC-270 Back Light Control rotated at 270° LCL19 LEED Corner Optic Left RCL19 LEED Corner Optic Right 120 120V 208 208V 240 240V 277 277V 347 347V 480 480V UNV 120-277V (50/60Hz) HVU 347-480V (50/60Hz) Options FinishDimming controls Motion sensing lens Photo-sensing Electrical Luminaire DD4.18 0-10V External dimming (for controls by others) DCC4,5,6,18 Dual Circuit Control FAWS4,5,18 Field Adjustable Wattage Selector LLC4,6,7,8,18 Integral wireless module BL1,4,7,18 Bi-level functionality SRDR4,5,6,8,17 SR driver connected to Zhaga socket DynaDimmer: Automatic Profile Dimming CS504,8 Safety 50% Dimming, 7 hours CM504,8 Median 50% Dimming, 8 hours CS304,8 Safety 30% Dimming, 7 hours CM304,8 Median 30% Dimming, 8 hours IMRI315 Integral with #3 lens IMRI716 Integral with #7 lens PCB8,9 Photocontrol Button TLRD510,17 Twist Lock Receptacle 5 Pin TLRD710,17 Twist Lock Receptacle 7 Pin TLRPC9,10,11,17 Twist Lock Receptacle w/Photocell Fusing F19 Single (120, 277, 347VAC) F29 Double (208, 240, 480VAC) Pole Mount Fusing FP19 Single (120, 277, 347VAC) FP29 Double (208, 240, 480VAC) FP39 Canadian Double Pull (208, 240, 480VAC) Surge Protection (10kA standard) SP2 Increased 20kA Square Pole Adapter included in standard product TB12 Terminal Block RPA13 Round Pole Adapter (fits to 3"- 3.9" O.D. pole) HIS14 Internal House Side Shield Textured BK Black WH White BZ Bronze DGY Dark Gray MGY Medium Gray Customer specified RAL Specify optional color or RAL (ex: RAL7024) CC Custom color (Must supply color chip for required factory quote) 1. BL-IMRI3/7 equipped with out-boarded sensor housing when voltage is HVU (347-480V) 2. Mounts to a 4" round pole with adapter included for square poles. 3. Limited to a maximum of 45 degrees aiming above horizontal. 4. Not available with other dimming control options. 5. Not available with motion sensor. 6. Not available with photocontrol. 7. Must specify a motion sensor lens. 8. Not available in 347 or 480V 9. Must specify input voltage. 10. TLRD5, TLRD7 and TLRPC receptacle pins 4 & 5 are capped off when ordered with any of the Dimming controls DD or FAWS or LLC. 11. Not available in 480V. Order photocell separately with TLRD5/7. 12. Not available with DCC. 13. Not available with SF and WS. RPAs provided with black finish standard. 14. HIS not available with Type 5, 5W, BLC, BLC-90, BLC-270, LCL or RCL optics. 15. Not available with DD, DCC, and FAWS dimming control options. 16. Not available with DD, DCC, FAWS and LLC dimming control options. 17. When ordering SRDR, controller (by others) to be used on socket must be SR compatible (See specifications for more details). Consult factory for lead time. All 7 pins in NEMA receptacle are connected to SR driver. SRDR not available with TLRD5 or TLRPC. 18. 0-10V dimming driver standard. 19. LCL and RCL not available with 48L-1.2A or 64L-1A. Site & Area EcoForm ECF-S small area light example: ECF-S-64L-900-NW-G2-AR-5-120-HIS-MGY ECF-S_EcoForm_area_small 08/21 page 2 of 9 ECF-S EcoForm small Area luminaire Shielding Accessories House Side shield Standard optic orientation: HIS-32-H 20 Internal House Side Shield for 32 LEDs (2 modules)HIS-48-H 20 Internal House Side Shield for 48 LEDs (3 modules)HIS-64-H 20 Internal House Side Shield for 64 LEDs (4 modules) Optic at 90 or 270 orientation: HIS-32-V 20 Internal House Side Shield for 32 LEDs (2 modules)HIS-48-V 20 Internal House Side Shield for 48 LEDs (3 modules)HIS-64-V 20 Internal House Side Shield for 64 LEDs (4 modules) EcoForm Accessories 21 (ordered separately, field installed) Ready to Go configurations (when ordered with the "RS-" catalog code, the following configurations will ship in 2 weeks): Luminaire Accessories ECF-BD-G2 Bird deterrentECF-RAM-G2-(F) Retrofit Arm mount kitECF-SF-G2-(F) Slip Fitter Mount (fits to 2 3⁄8" O.D. tenon)ECF-WS-G2-(F) Wall mount with surface conduit rear entry permitted EcoForm PTF2 (pole top fitter fits 23⁄8-21⁄2" OD x 4" depth tenon) PTF2-ECF-S/L-1-90-(F) 1 luminaire at 90°PTF2-ECF-S/L-2-90-(F) 2 luminaires at 90°PTF2-ECF-S/L-2-180-(F) 2 luminaires at 180°PTF2-ECF-S/L-3-90-(F) 3 luminaires at 90°PTF2-ECF-S/L-4-90-(F) 4 luminaires at 90°PTF2-ECF-S/L-3-120-(F) 3 luminaires at 120° (F) = Specify finish EcoForm PTF3 (pole top fitter fits 3-31⁄2" OD x 6" depth tenon) PTF3-ECF-S/L-1-90-(F) 1 luminaire at 90°PTF3-ECF-S/L-2-90-(F) 2 luminaires at 90°PTF3-ECF-S/L-2-180-(F) 2 luminaires at 180°PTF3-ECF-S/L-3-90-(F) 3 luminaires at 90°PTF3-ECF-S/L-4-90-(F) 4 luminaires at 90°PTF3-ECF-S/L-3-120-(F) 3 luminaires at 120° EcoForm PTF4 (pole top fitter fits 31⁄2-4" OD x 6" depth tenon) PTF4-ECF-S/L-1-90-(F) 1 luminaire at 90°PTF4-ECF-S/L-2-90-(F) 2 luminaires at 90°PTF4-ECF-S/L-2-180-(F) 2 luminaires at 180°PTF4-ECF-S/L-3-90-(F) 3 luminaires at 90°PTF4-ECF-S/L-4-90-(F) 4 luminaires at 90°PTF4-ECF-S/L-3-120-(F) 3 luminaires at 120° 20. Not available with Type 5 or 5W optics 21. Consult Signify to confirm whether specific accessories are BAA-compliant. Footnotes Catalog Number 12NC RS-ECF-S-32L-1A-NW-G2-AR-3-UNV-BZ 912401466002 RS-ECF-S-32L-1A-NW-G2-AR-3-UNV-MGY 912401466003 RS-ECF-S-32L-1A-NW-G2-AR-3-UNV-BK 912401534554 RS-ECF-S-32L-1A-NW-G2-AR-4-UNV-BZ 912401466004 RS-ECF-S-32L-1A-NW-G2-AR-4-UNV-MGY 912401466005 RS-ECF-S-32L-1A-NW-G2-AR-4-UNV-BK 912401534555 RS-ECF-S-32L-1A-NW-G2-AR-5-UNV-BZ 912401466006 RS-ECF-S-32L-1A-NW-G2-AR-5-UNV-MGY 912401466007 RS-ECF-S-32L-1A-NW-G2-AR-5-UNV-BK 912401534556 RS-ECF-S-48L-1A-NW-G2-AR-3-UNV-BZ 912401466008 RS-ECF-S-48L-1A-NW-G2-AR-3-UNV-MGY 912401466009 RS-ECF-S-48L-1A-NW-G2-AR-3-UNV-BK 912401534557 RS-ECF-S-48L-1A-NW-G2-AR-4-UNV-BZ 912401466010 RS-ECF-S-48L-1A-NW-G2-AR-4-UNV-MGY 912401466011 RS-ECF-S-48L-1A-NW-G2-AR-4-UNV-BK 912401534558 RS-ECF-S-48L-1A-NW-G2-AR-5-UNV-BZ 912401466012 RS-ECF-S-48L-1A-NW-G2-AR-5-UNV-MGY 912401466013 RS-ECF-S-48L-1A-NW-G2-AR-5-UNV-BK 912401534559 RS-ECF-S-64L-1A-NW-G2-AR-3-UNV-BZ 912401466014 RS-ECF-S-64L-1A-NW-G2-AR-3-UNV-MGY 912401466015 Catalog Number 12NC RS-ECF-S-64L-1A-NW-G2-AR-3-UNV-BK 912401534560 RS-ECF-S-64L-1A-NW-G2-AR-4-UNV-BZ 912401466016 RS-ECF-S-64L-1A-NW-G2-AR-4-UNV-MGY 912401466017 RS-ECF-S-64L-1A-NW-G2-AR-4-UNV-BK 912401534561 RS-ECF-S-64L-1A-NW-G2-AR-5-UNV-BZ 912401466018 RS-ECF-S-64L-1A-NW-G2-AR-5-UNV-MGY 912401466019 RS-ECF-S-64L-1A-NW-G2-AR-5-UNV-BK 912401534562 RS-ECF-RAM-G2-DGY 912401466487 RS-ECF-RAM-G2-MGY 912401466488 RS-ECF-RAM-G2-WH 912401466485 RS-HIS-32-H 912401466489 RS-HIS-48-H 912401466491 RS-HIS-64-H 912401466493 ECF-S_EcoForm_area_small 08/21 page 3 of 9 ECF-S EcoForm small Area luminaire Optical Distributions Based on configuration ECF-S-48L-1A-NW-G2 (159W) mounted at 20ft. 1 MH2 MH3 MH 1 MH 2 MH 3 MH 5 MH5 MH 1 MH 2 MH 3 MH 1 MH 2 MH 3 MH 4 MH 4 MH 4 MH 4 MH 0 0 AFR 1 MH2 MH3 MH 1 MH 2 MH 3 MH 5 MH5 MH 1 MH 2 MH 3 MH 1 MH 2 MH 3 MH 4 MH 4 MH 4 MH 4 MH 0 0 0.2 fc 0.5 fc 1 fc 2 fc Type 2 1 MH2 MH3 MH 1 MH 2 MH 3 MH 5 MH5 MH 1 MH 2 MH 3 MH 1 MH 2 MH 3 MH 4 MH 4 MH 4 MH 4 MH 0 0 Type 3 1 MH2 MH3 MH 1 MH 2 MH 3 MH 5 MH5 MH 1 MH 2 MH 3 MH 1 MH 2 MH 3 MH 4 MH 4 MH 4 MH 4 MH 0 0 Type 4 1 MH2 MH3 MH 1 MH 2 MH 3 MH 5 MH5 MH 1 MH 2 MH 3 MH 1 MH 2 MH 3 MH 4 MH 4 MH 4 MH 4 MH 0 0 BLC 1 MH2 MH3 MH 1 MH 2 MH 3 MH 5 MH5 MH 1 MH 2 MH 3 MH 1 MH 2 MH 3 MH 4 MH 4 MH 4 MH 4 MH 0 0 Type 5 1 MH2 MH3 MH 1 MH 2 MH 3 MH 5 MH5 MH 1 MH 2 MH 3 MH 1 MH 2 MH 3 MH 4 MH 4 MH 4 MH 4 MH 0 0 Type 5W 0.2 fc0.5 fc 1 fc 2 fc 1 MH2 MH3 MH 1 MH 2 MH 3 MH 5 MH5 MH 1 MH 2 MH 3 MH 1 MH 2 MH 3 MH 4 MH 4 MH 4 MH 4 MH 0 0 LCL 0.2 fc 0.5 fc 1 fc 2 fc 0.2 fc 0.5 fc 1 fc 2 fc 0.2 fc 0.5 fc 1 fc2 fc 0.2 fc 0.5 fc 1 fc 2 fc 0.2 fc 0.5 fc1 fc2 fc 0.1 fc 0.2 fc 0.5 fc 1.0 fc 1 MH2 MH3 MH 1 MH 2 MH 3 MH 5 MH5 MH 1 MH 2 MH 3 MH 1 MH 2 MH 3 MH 4 MH 4 MH 4 MH 4 MH 0 0 RCL 0.1 fc 0.2 fc 0.5 fc 1.0 fc Predicted Lumen Depreciation Data Predicted performance derived from LED manufacturer’s data and engineering design estimates, based on IESNA LM-80 methodology. Actual experience may vary due to field application conditions.L70 is the predicted time when LED performance depreciates to 70% of initial lumen output. Calculated per IESNA TM21-11. Published L70 hours limited to 6 times actual LED test hours Ambient Temperature °C Driver mA Calculated L70 Hours L70 per TM-21 Lumen Maintenance % at 60,000 hrs 25°C up to 1200 mA >100,000 hours >120,000 hours >99% ECF-S_EcoForm_area_small 08/21 page 4 of 9 ECF-S EcoForm small Area luminaire 3000K LED Wattage and Lumen Values 4000K LED Wattage and Lumen Values Ordering Code Total LEDs LED Current (mA) Color Temp. Average System Watts Type 2 Type 3 Type 4 Type 5 Type 5W Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) ECF-S-32L-365-WW-G2-x 32 365 3000 40 5,508 B1-U0-G1 138 5,428 B1-U0-G2 136 5,637 B1-U0-G2 141 5,790 B3-U0-G1 145 5,604 B3-U0-G1 140 ECF-S-32L-530-WW-G2-x 32 530 3000 56 7,159 B2-U0-G2 129 7,055 B1-U0-G2 127 7,327 B1-U0-G2 132 7,526 B3-U0-G2 135 7,284 B3-U0-G2 131 ECF-S-32L-700-WW-G2-x 32 700 3000 73 9,234 B2-U0-G2 127 9,034 B2-U0-G2 124 9,452 B2-U0-G2 130 9,707 B4-U0-G2 133 9,395 B4-U0-G2 129 ECF-S-32L-1A-WW-G2-x 32 1050 3000 106 13,001 B3-U0-G2 123 12,719 B2-U0-G2 120 13,306 B2-U0-G3 126 13,665 B4-U0-G2 129 13,227 B4-U0-G2 125 ECF-S-32L-1.2A-WW-G2-x 32 1200 3000 122 14,421 B3-U0-G3 119 14,108 B2-U0-G3 116 14,760 B2-U0-G3 121 15,158 B4-U0-G2 125 14,671 B4-U0-G2 121 ECF-S-48L-900-WW-G2-x 48 900 3000 135 17,115 B3-U0-G3 127 16,744 B3-U0-G3 124 17,518 B2-U0-G3 130 17,990 B4-U0-G2 133 17,413 B5-U0-G3 129 ECF-S-48L-1A-WW-G2-x 48 1050 3000 159 19,381 B3-U0-G3 122 18,960 B3-U0-G3 119 19,836 B3-U0-G4 125 20,372 B5-U0-G3 128 19,717 B5-U0-G3 124 ECF-S-48L-1.2A-WW-G2-x 48 1200 3000 183 21,515 B3-U0-G3 118 21,048 B3-U0-G4 115 22,020 B3-U0-G4 121 22,616 B5-U0-G3 124 21,888 B5-U0-G3 120 ECF-S-64L-900-WW-G2-x 64 900 3000 178 22,652 B3-U0-G3 127 22,161 B3-U0-G4 125 23,185 B3-U0-G4 130 23,810 B5-U0-G3 134 23,045 B5-U0-G3 130 ECF-S-64L-1A-WW-G2-x 64 1050 3000 206 25,520 B3-U0-G3 124 24,966 B3-U0-G4 121 26,120 B3-U0-G4 127 26,150 B5-U0-G3 127 25,964 B5-U0-G4 126 Ordering Code Total LEDs LED Current (mA) Color Temp. Average System Watts Type 2 Type 3 Type 4 Type 5 Type 5W Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) ECF-S-32L-365-NW-G2-x 32 365 4000 40 5,798 B1-U0-G1 145 5,713 B1-U0-G2 143 5,934 B1-U0-G2 148 6,094 B3-U0-G1 152 5,898 B3-U0-G2 147 ECF-S-32L-530-NW-G2-x 32 530 4000 56 7,536 B2-U0-G2 135 7,426 B1-U0-G2 133 7,713 B1-U0-G2 138 7,922 B3-U0-G2 142 7,667 B3-U0-G2 138 ECF-S-32L-700-NW-G2-x 32 700 4000 73 9,720 B2-U0-G2 133 9,509 B2-U0-G2 130 9,949 B2-U0-G2 136 10,218 B4-U0-G2 140 9,889 B4-U0-G2 136 ECF-S-32L-1A-NW-G2-x 32 1050 4000 106 13,685 B3-U0-G2 130 13,388 B2-U0-G3 127 14,006 B2-U0-G3 133 14,384 B4-U0-G2 136 13,923 B4-U0-G2 132 ECF-S-32L-1.2A-NW-G2-x 32 1200 4000 122 15,180 B3-U0-G3 125 14,851 B2-U0-G3 122 15,537 B2-U0-G3 128 15,956 B4-U0-G2 131 15,443 B4-U0-G2 127 ECF-S-48L-900-NW-G2-x 48 900 4000 135 18,016 B3-U0-G3 133 17,625 B3-U0-G3 130 18,440 B3-U0-G3 136 18,937 B4-U0-G3 140 18,329 B5-U0-G3 136 ECF-S-48L-1A-NW-G2-x 48 1050 4000 159 20,401 B3-U0-G3 129 19,958 B3-U0-G4 126 20,880 B3-U0-G4 132 21,444 B5-U0-G3 135 20,755 B5-U0-G3 131 ECF-S-48L-1.2A-NW-G2-x 48 1200 4000 183 22,647 B3-U0-G3 124 22,156 B3-U0-G4 121 23,179 B3-U0-G4 127 23,806 B5-U0-G3 130 23,040 B5-U0-G3 126 ECF-S-64L-900-NW-G2-x 64 900 4000 178 23,844 B3-U0-G3 134 23,327 B3-U0-G4 131 24,405 B3-U0-G4 137 25,063 B5-U0-G3 141 24,258 B5-U0-G4 136 ECF-S-64L-1A-NW-G2-x 64 1050 4000 206 26,863 B3-U0-G3 130 26,280 B3-U0-G4 128 27,495 B3-U0-G4 134 27,526 B5-U0-G3 134 27,330 B5-U0-G4 133 Ordering Code Total LEDs LED Current (mA) Color Temp. Average System Watts Type AFR BLC LCL or RCL Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) ECF-S-32L-365-WW-G2-x 32 365 3000 40 5,706 B2-U0-G1 143 3,691 B0-U0-G1 94 2,449 B0-U0-G1 62 ECF-S-32L-530-WW-G2-x 32 530 3000 56 7,417 B2-U0-G1 133 5,005 B0-U0-G2 91 3,183 B0-U0-G1 58 ECF-S-32L-700-WW-G2-x 32 700 3000 73 9,567 B2-U0-G2 131 6,409 B0-U0-G2 89 4,106 B0-U0-G1 57 ECF-S-32L-1A-WW-G2-x 32 1050 3000 106 13,467 B3-U0-G2 128 9,024 B1-U0-G2 87 5,793 B0-U0-G2 56 ECF-S-32L-1.2A-WW-G2-x 32 1200 3000 122 14,939 B3-U0-G2 123 10,010 B1-U0-G2 84 6,426 B0-U0-G2 54 ECF-S-48L-900-WW-G2-x 48 900 3000 135 17,731 B3-U0-G2 131 11,880 B1-U0-G2 89 7,626 B0-U0-G2 57 ECF-S-48L-1A-WW-G2-x 48 1050 3000 159 20,076 B3-U0-G2 127 13,453 B1-U0-G2 86 8,636 B0-U0-G2 55 ECF-S-48L-1.2A-WW-G2-x 48 1200 3000 183 22,288 B3-U0-G2 122 14,934 B1-U0-G3 83 ECF-S-64L-900-WW-G2-x 64 900 3000 178 23,465 B3-U0-G2 132 15,723 B1-U0-G3 90 10,093 B0-U0-G2 58 ECF-S-64L-1A-WW-G2-x 64 1050 3000 206 26,437 B4-U0-G3 128 17,714 B1-U0-G3 87 Ordering Code Total LEDs LED Current (mA) Color Temp. Average System Watts Type AFR BLC LCL or RCL Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) ECF-S-32L-365-NW-G2-x 32 365 4000 40 6,006 B2-U0-G1 150 3,991 B0-U0-G1 101 2,633 B0-U0-G1 67 ECF-S-32L-530-NW-G2-x 32 530 4000 56 7,807 B2-U0-G1 140 5,412 B0-U0-G2 99 3,423 B0-U0-G1 62 ECF-S-32L-700-NW-G2-x 32 700 4000 73 10,070 B2-U0-G2 138 6,930 B0-U0-G2 96 4,415 B0-U0-G1 61 ECF-S-32L-1A-NW-G2-x 32 1050 4000 106 14,176 B3-U0-G2 134 9,756 B1-U0-G2 94 6,229 B0-U0-G2 60 ECF-S-32L-1.2A-NW-G2-x 32 1200 4000 122 15,725 B3-U0-G2 129 10,822 B1-U0-G2 90 6,910 B0-U0-G2 58 ECF-S-48L-900-NW-G2-x 48 900 4000 135 18664,B3-U0-G2 138 12,843 B1-U0-G2 96 8,200 B0-U0-G2 62 ECF-S-48L-1A-NW-G2-x 48 1050 4000 159 21,133 B3-U0-G2 133 14,544 B1-U0-G3 93 9,286 B0-U0-G2 59 ECF-S-48L-1.2A-NW-G2-x 48 1200 4000 183 23,461 B3-U0-G2 128 16,145 B1-U0-G3 90 ECF-S-64L-900-NW-G2-x 64 900 4000 178 24,700 B3-U0-G2 139 16,998 B1-U0-G3 97 10,853 B0-U0-G2 62 ECF-S-64L-1A-NW-G2-x 64 1050 4000 206 27,828 B4-U0-G3 135 19,150 B1-U0-G3 94 ECF-S_EcoForm_area_small 08/21 page 5 of 9 ECF-S EcoForm small Area luminaire 5000K LED Wattage and Lumen Values Ordering Code Total LEDs LED Current (mA) Color Temp. Average System Watts Type 2 Type 3 Type 4 Type 5 Type 5W Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) ECF-S-32L-365-CW-G2-x 32 365 5000 40 5,798 B1-U0-G1 145 5,713 B1-U0-G2 143 5,934 B1-U0-G2 148 6,094 B3-U0-G1 152 5,898 B3-U0-G2 147 ECF-S-32L-530-CW-G2-x 32 530 5000 56 7,536 B2-U0-G2 135 7,426 B1-U0-G2 133 7,713 B1-U0-G2 138 7,922 B3-U0-G2 142 7,667 B3-U0-G2 138 ECF-S-32L-700-CW-G2-x 32 700 5000 73 9,720 B2-U0-G2 133 9,509 B2-U0-G2 130 9,949 B2-U0-G2 136 10,218 B4-U0-G2 140 9,889 B4-U0-G2 136 ECF-S-32L-1A-CW-G2-x 32 1050 5000 106 13,685 B3-U0-G2 130 13,388 B2-U0-G3 127 14,006 B2-U0-G3 133 14,384 B4-U0-G2 136 13,923 B4-U0-G2 132 ECF-S-32L-1.2A-CW-G2-x 32 1200 5000 122 15,180 B3-U0-G3 125 14,851 B2-U0-G3 122 15,537 B2-U0-G3 128 15,956 B4-U0-G2 131 15,443 B4-U0-G2 127 ECF-S-48L-900-CW-G2-x 48 900 5000 135 18,016 B3-U0-G3 133 17,625 B3-U0-G3 130 18,440 B3-U0-G3 136 18,937 B4-U0-G3 140 18,329 B5-U0-G3 136 ECF-S-48L-1A-CW-G2-x 48 1050 5000 159 20,401 B3-U0-G3 129 19,958 B3-U0-G4 126 20,880 B3-U0-G4 132 21,444 B5-U0-G3 135 20,755 B5-U0-G3 131 ECF-S-48L-1.2A-CW-G2-x 48 1200 5000 183 22,647 B3-U0-G3 124 22,156 B3-U0-G4 121 23,179 B3-U0-G4 127 23,806 B5-U0-G3 130 23,040 B5-U0-G3 126 ECF-S-64L-900-CW-G2-x 64 900 5000 178 23,844 B3-U0-G3 134 23,327 B3-U0-G4 131 24,405 B3-U0-G4 137 25063 B5-U0-G3 141 24258 B5-U0-G4 136 ECF-S-64L-1A-CW-G2-x 64 1050 5000 206 26,863 B3-U0-G3 130 26,280 B3-U0-G4 128 27,495 B3-U0-G4 134 27526 B5-U0-G3 134 27330 B5-U0-G4 133 Ordering Code Total LEDs LED Current (mA) Color Temp. Average System Watts Type AFR BLC LCL or RCL Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) Lumen Output BUG Rating Efficacy (LPW) ECF-S-32L-365-CW-G2-x 32 365 5000 40 6,006 B2-U0-G1 150 3,991 B0-U0-G1 101 2,633 B0-U0-G1 67 ECF-S-32L-530-CW-G2-x 32 530 5000 56 7,807 B2-U0-G1 140 5,412 B0-U0-G2 99 3,423 B0-U0-G1 62 ECF-S-32L-700-CW-G2-x 32 700 5000 73 10,070 B2-U0-G2 138 6,930 B0-U0-G2 96 4,415 B0-U0-G1 61 ECF-S-32L-1A-CW-G2-x 32 1050 5000 106 14,176 B3-U0-G2 134 9,756 B1-U0-G2 94 6,229 B0-U0-G2 60 ECF-S-32L-1.2A-CW-G2-x 32 1200 5000 122 15,725 B3-U0-G2 129 10,822 B1-U0-G2 90 6,910 B0-U0-G2 58 ECF-S-48L-900-CW-G2-x 48 900 5000 135 18,664 B3-U0-G2 138 12,843 B1-U0-G2 96 8,200 B0-U0-G2 62 ECF-S-48L-1A-CW-G2-x 48 1050 5000 159 21,133 B3-U0-G2 133 14,544 B1-U0-G3 93 9,286 B0-U0-G2 59 ECF-S-48L-1.2A-CW-G2-x 48 1200 5000 183 23,461 B3-U0-G2 128 16,145 B1-U0-G3 90 ECF-S-64L-900-CW-G2-x 64 900 5000 178 24,700 B3-U0-G2 139 16,998 B1-U0-G3 97 10,853 B0-U0-G2 62 ECF-S-64L-1A-CW-G2-x 64 1050 5000 206 27,828 B4-U0-G3 135 19,150 B1-U0-G3 94 ECF-S_EcoForm_area_small 08/21 page 6 of 9 ECF-S EcoForm small Area luminaire Dimensions Standard Arm (AR) Weight: 22 Lbs (9.9 Kg) EPA: 0.21ft2 (.019m2) Retrofit Arm (RAM) Weight: 24 Lbs (10.9 Kg) EPA: 0.24ft2 (.022m2) Slip fitter (SF) Weight: 27 Lbs (12.2 Kg) EPA: 0.33ft2 (.031m2) Wall (WS) Weight: 27 Lbs. (12. 2Kg) EPA: 0.27ft2 (.025m2) 6.5"(16.5cm) 28.7" (73cm) 14.9"(37.9cm) 2.2"(5.7cm) 1.3"(3.2cm) 28.7" (73cm) 7.0"(17.8cm) 5.0"(12.7cm)3.6"(9cm) 14.9"(37.9cm) 5.4" (13.6cm) 9.7" (24.7cm) 15.4" (39.2cm) 37.2" (94.4cm) 37.2" (94.4cm) 5.0"(12.7cm) 27.5" (69.7cm) 14.9"(37.9cm) 2.4"(6cm) 27.5" (69.7cm) 5.7"(14.6cm) 7.6" (19.4cm) 29.3" (74.5cm) 6.5"(16.5cm) 14.9"(37.9cm) 29.3" (74.5cm) 2.0"(5.1cm) Outboard IMR-HVU sensor Retrofit Arm (RAM) drill pattern Standard Arm (AR) drill pattern 3.1"(7.9cm) 3.4"(8.6cm) 5.3 " (13.4cm) 4.7"(11.9cm) 0.41"(1.04cm) 1.0"(2.5cm) 0.41"(1.04cm) 5.2"(13.2cm) 1.0"(2.5cm) 2"(5.1cm) 0.41"(1.04cm) 1.0"(2.5cm) 0.41"(1.04cm) 3"(7.6cm) 1.0"(2.5cm) 1.0"(2.5cm) ECF-S_EcoForm_area_small 08/21 page 7 of 9 ECF-S EcoForm small Area luminaire Optical Orientation Information Standard Optic Position Luminaires ordered with asymmetric optical systems in the standard optic position will have the optical system oriented as shown below: Optic Rotated Right (270°) Optic Position Luminaires ordered with optical systems in the Optic Rotated Right (270°) optic position will have the optical system oriented as shown below (Type 5 and 5W optics are not available with factory set rotatable optics): Optic Rotated Left (90°) Optic Position Luminaires ordered with optical systems in the Optic Rotated Left (90°) optic position will have the optical system oriented as shown below (Type 5 and 5W optics are not available with factory set rotatable optics): Twin Luminaire Assemblies with Type-90/Type-270 Rotated Optical Systems Twin luminaire assemblies installed with rotated optical systems are an excellent way to direct light toward the interior of the site (Street Side) without additional equipment. It is important, however, that care be exercised to insure that luminaires are installed in the proper location. Street Side Street Side House Side House Side Curbline Curbline Right side of pole Left side of pole 0°0° 270°270° 90° 90° Note: The hand hole will normally be located on the pole at the 0° point. Note: The hand hole will normally be located on the pole at the 0° point. Right side of pole Left side of pole Street Side House Side Curbline Right side of pole Left side of pole 0° 270° 90° Note: The hand hole will normally be located on the pole at the 0° point. Note: The hand hole location will depend on the drilling configuration ordered for the pole. Luminaires with Optic Rotated Right (270°) are installed on the LEFT Side of Pole Luminaires with Optic Rotated Left (90°) are installed on the RIGHT Side of Pole Street Side House Side Curbline 0° Right side of pole Left side of pole Luminaire with Type-270 Luminaire with Type-90 180° ECF-S_EcoForm_area_small 08/21 page 8 of 9 ECF-S EcoForm small Area luminaire Housing One-piece die cast aluminum housing with integral arm and separate, self- retained hinged, one-piece die cast door frame. Luminaire housing rated to IP66, tested in accordance to Section 9 of IEC 60598-1. Vibration resistance Luminaire is tested and rated 3G over 100,000 cycles conforming to standards set forth by ANSI C136.31-2018. Testing includes vibration in three axes, all performed on the same luminaire. Light engine Light engine comprises of a module of 16-LED aluminum metal clad board fully sealed with optics offered in multiples of 2, 3, and 4 modules or 32, 48, and 64 LEDs. Module is RoHS compliant. Color temperatures: 3000K +/-125K, 4000K, 5000K +/- 200K. Minimum CRI of 70. LED light engine is rated IP66 in accordance to Section 9 of IEC 60598-1. Energy saving benefits System efficacy up to 152 lms/W with significant energy savings over Pulse Start Metal Halide luminaires. Optional control options provide added energy savings during unoccupied periods. Optical systems Type 2, 3, 4, 5, 5W, and AFR distributions available. Internal Shield option mounts to LED optics and is available with Type 2, 3, 4, and AFR distributions, including a dedicated BLC, LCL, and RCL optics to provide the best backlight control possible for those stringent requirements around property lines. Types 2, 3, 4, AFR, and BLC when specified and used as rotated, are factory set only. Performance tested per LM-79 and TM-15 (IESNA) certifying its photometric performance. Luminaire designed with 0% uplight (U0 per IESNA TM-15). Mounting Standard luminaire arm mounts to 4" O.D. round poles. Can also be used with 5" O.D. poles. Square pole adapter included with every luminaire. Round Pole Adapter (RPA) required for 3-3.9" poles. EcoForm features a retrofit arm kit. When specified with the retrofit arm (RAM) option, EcoForm seamlessly simplifies site conversions to LED by eliminating the need for additional pole drilling on most existing poles. RAM will be boxed separately. Also optional are slipfitter and wall mounting accessories. Note that only fixed mounts (AR, RAM, WS) are required to meet IDA compliance. SF mounting will not meet IDA. Control options 0-10V dimming (DD): Access to 0-10V dimming leads supplied through back of luminaire (for secondary dimming controls by others). Cannot be used with other control options. Dual Circuit Control (DCC): Luminaire equipped with the ability to have two separate circuits controlling drivers and light engines independently. Permits separate switching of separate modules controlled by use of two sets of leads, one for each circuit. Not recommended to be used with other control options, motion response, or photocells. Sensor Ready Zhaga Socket Connector (SRDR): Product equipped with Sensor Ready drivers connected to 4-pin Zhaga Book 18 compliant receptacle designed for sensor and other control system applications. Receptacle is rated IP66 assembly in a compact design that provides a sealed electrical interface and rated UV resistance, mounted on underside of the luminaire, protective dust cap included. When a controller not provided by Signify is used with Sensor Ready Zhaga socket connector, the controller must be certified to work with the Xitanium SR LED drivers as part of the SR certified program. SRDR can be used with NEMA 7-pin twist lock receptacle, which is mounted on top of the luminaire. Automatic Profile Dimming (CS/CM/CE/CA): Standard dimming profiles provide flexibility towards energy savings goals while optimizing light levels during specific dark hours. Dimming profiles include two dimming settings including dim to 30% or 50% of the total lumen output. When used in combination with not programmed motion response it overrides the controller’s schedule when motion is detected. After 5 minutes with no motion, it will return to the automatic diming profile schedule. Automatic dimming profile scheduled with the following settings: • CS50/CS30: Security for 7 hours night duration (Ex., 11 PM - 6 AM) • CM50/CM30: Median for 8 hours night duration (Ex., 10 PM - 6 AM) All above profiles are calculated from mid point of the night. Dimming is set for 6 hours after the mid point and 1 or 2 hours before depending of the duration of dimming. Cannot be used with other dimming control options. Field Adjustable Wattage Selector (FAWS): Luminaire equipped with the ability to manually adjust the wattage in the field to reduce total luminaire lumen output and light levels. Comes pre-set to the highest position at the lumen output selected. Use chart below to estimate reduction in lumen output desired. Cannot be used with other control options or motion response. Wireless system (LLC): Optional wireless controller integral to luminaire ready to be connected to a Limelight system (sold by others). The system allows you to wirelessly manage the entire site, independent lighting groups or individual luminaires while on-site or remotely. Based on a high-density mesh network with an easy to use web-based portal, you can conveniently access, monitor and manage your lighting network remotely. Wireless controls can be combined with site and area, pedestrian, and parking garage luminaires as well, for a completely connected outdoor solution. Equipped with motion response with #3 lens for 8-25' mounting heights. Also available with remote pod accessory where pod is mounted separate from luminaire to pole or wall. Motion response options Bi-Level Infrared Motion Response (BL-IMRI): Motion Response module is mounted integral to luminaire factory pre-programmed to 50% dimming when not ordered with other control options. BL-IMRI is set/operates in the following fashion: The motion sensor is set to a constant 50%. When motion is detected by the PIR sensor, the luminaire returns to full power/light output. Dimming on low is factory set to 50% with 5 minutes default in "full power" prior to dimming back to low. When no motion is detected for 5 minutes, the motion response system reduces the wattage by 50%, to 50% of the normal constant wattage reducing the light level. Other dimming settings can be provided if different dimming levels are required. This can also be done with FSIR-100 Wireless Remote Programming Tool (contact Technical Support for details). Infrared Motion Response with Other Controls: When used in combination with other controls (Automatic Dimming Profile), motion response device will simply override controller’s schedule with the added benefits of a combined dimming profile and sensor detection. In this configuration, the motion response device cannot be re-programmed with FSIR-100 Wireless Remote Programming Tool. The profile can only be re-programmed via the controller. FAWS Position Percent of Typical Lumen Output 1 25% 2 50% 3 55% 4 65% 5 75% 6 80% 7 85% 8 90% 9 95% 10 100% Note: Typical value accuracy +/- 5% 30'27' 20' 12' 6'3' 3'6' 12' 20' 27' 30' 0'60' 0' 10' 20' 30' 40' 0' 20' 10' 10' 20' 40'10' 20' 0' 15' 5' 0' 8' 0'3'3'7'7'11''42'1124' 30' 20' 10' 10' 20' 0' 10'0'10'20'20' 0'10'10'20'20' 44 ft 27' 20' 12' 6' 3' 0 3' 6' 12' 20' 27' 30' 30' 20' 12' 6' 0 6' 12' 20' 30' 20' 18' 15' 12' 9' 6' 3' 0 3' 6' 9' 12' 15' 18' 20' 0' 27' 40'50'25'0'25'50' 0' 50' 25' 25' 50' 100' 50' 40' 30' 20' 10' 0 10' 20' 30' 40' 50' LLC wireless controller with #3 lens Specifications ECF-S_EcoForm_area_small 08/21 page 9 of 9 ECF-S EcoForm small Area luminaire Infrared Motion Response Lenses (IMRI3/IMRI7): Infrared Motion Response Integral module is available with two different sensor lens types to accommodate various mounting heights and occupancy detection ranges. Lens #3 (IMRI3) is designed for mounting heights up to 20’ with a 40’ diameter coverage area. Lens #7 is designed for higher mounting heights up to 40’ with larger coverage areas up to 100’ diameter coverage area. See charts for approximate detection patterns: Electrical Twist-Lock Receptacle (TLRD5/TLRD7/ TLRPC): Twist Lock Receptacle with 5 pins enabling dimming or with 7 pins with additional functionality (by others) can be used with a twistlock photoelectric cell or a shorting cap. Dimming Receptacle Type B (5-pin) and Type D-24 (7-pin) in accordance to ANSI C136.41. Can be used with third-party control system. Receptacle located on top of luminaire housing. When specifying receptacle with twistlock photoelectric cell, voltage must be specified. When ordering 7-pin Twist- lock receptacle (TLRD7), all 7 pins are wired to respective pins with the Sensor Ready (SR) driver, and photocell or shorting cap is not included. When ordering a twist-lock receptacle with a photocell (TLRPC), the receptacle used is a 5-pin receptacle, so pins 6 and 7 are not available (no SR driver). 0-10V dimming leads (pins 4 and 5) are connected if not ordered with any other dimming option. Driver: Driver efficiency (>90% standard). 120-480V available (restrictions apply). Open/short circuit protection. All drivers are 0-10V dimming to 10% power standard, except when using Sensor Ready (SR) drivers, which uses DALI protocol (options CS50/CM50/CS30/CM30, SRDR, and TR7). Drivers are RoHS and FCC Title 47 CFR Part 15 compliant. Button Photocontrol (PCB): Button style design for internal luminaires mounting applications. The photocontrol is constructed of a high impact UV stabilized polycarbonate housing. Rated voltage of 120V or 208-277V with a load rating of 1000 VA. The photocell will turn on with 1-4Fc of ambient light. Surge protection (SP1/SP2): Surge protection device tested in accordance with ANSI/IEEE C62.45 per ANSI/IEEE C62.41.2 Scenario I Category C High Exposure 10kV/10kA waveforms for Line-Ground, Line-Neutral and Neutral- Ground, and in accordance with DOE MSSLC Model Specification for LED Roadway Luminaires Appendix D Electrical Immunity High test level 10kV/10kA. 20kV / 10kA surge protection device that provides extra protection beyond the SP1 10kV/10kA level. Listings UL/cUL wet location listed to the UL 1598 standard, suitable for use in ambient temperatures from -40° to 40°C (-40° to 104°F). Most EcoForm configurations are qualified under Premium and Standard DesignLights Consortium® categories. Consult DLC Qualified Products list to confirm your specific luminaire selection is approved. CCTs 3000K and warmer are Dark Sky Approved. Finish Each standard color luminaire receives a fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) textured polyester powdercoat finish. Standard colors include bronze (BZ), black (BK), white (WH), dark gray (DGY), and medium gray (MGY). Consult factory for specs on optional or custom colors. Service Tag Each individual luminaire is uniquely identifiable, thanks to the Service tag application. With a simple scan of a QR code, placed on the inside of the mast door, you gain instant access to the luminaire configuration, making installation and maintenance operations faster and easier, no matter what stage of the luminaire’s lifetime. Just download the APP and register your product right away. For more details visit: signify.com Warranty EcoForm luminaires feature a 5-year limited warranty See signify.com/warranties for complete details and exclusions. Specifications 30'27' 20' 12' 6'3' 3'6' 12' 20' 27' 30' 0'60' 0' 10' 20' 30' 40' 0' 20' 10' 10' 20' 40'10' 20' 0' 15' 5' 0' 8' 0'3'3'7'7'11''42'1124' 30' 20' 10' 10' 20' 0' 10'0'10'20'20' 0'10'10'20'20' 44 ft 27' 20' 12' 6' 3' 0 3' 6' 12' 20' 27' 30' 30' 20' 12' 6' 0 6' 12' 20' 30' 20' 18' 15' 12' 9' 6' 3' 0 3' 6' 9' 12' 15' 18' 20' 0' 27' 40'50'25'0'25'50' 0' 50' 25' 25' 50' 100' 50' 40' 30' 20' 10' 0 10' 20' 30' 40' 50' IMRI3 Luminaire or remote mount controller with #3 lens IMRI7 Luminaire or remote mount controller with #7 lens 30'27' 20' 12' 6'3' 3'6' 12' 20' 27' 30' 0'60' 0' 10' 20' 30' 40' 0' 20' 10' 10' 20' 40'10' 20' 0' 15' 5' 0' 8' 0'3'3'7'7'11''42'1124' 30'20'10' 10' 20' 0' 10'0'10'20'20' 0'10'10'20'20' 44 ft 27' 20' 12' 6' 3' 0 3' 6' 12' 20' 27' 30' 30' 20' 12' 6' 0 6' 12' 20' 30' 20' 18' 15' 12' 9' 6' 3' 0 3' 6' 9' 12' 15' 18' 20' 0' 27' 40'50'25'0'25'50' 0' 50' 25' 25' 50' 100' 50' 40' 30' 20' 10' 0 10' 20' 30' 40' 50' © 2021 Signify Holding. All rights reserved. The information provided herein is subject to change, without notice. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. ECF-S_EcoForm_area_small 08/21 page 9 of 9 Signify North America Corporation 200 Franklin Square Drive, Somerset, NJ 08873 Telephone 855-486-2216 Signify Canada Ltd. 281 Hillmount Road, Markham, ON, Canada L6C 2S3 Telephone 800-668-9008 All trademarks are owned by Signify Holding or their respective owners. www.gardcolighting.com Buy American Act of 1933 (BAA): This product is manufactured in one of our US factories and, as of the date of this document, this product was considered a commercially available off-the-shelf (COTS) item meeting the requirements of the BAA. This BAA designation hereunder does not address (i) the applicability of, or availability of a waiver under, the Trade Agreements Act, or (ii) the “Buy America” domestic content requirements imposed on states, localities, and other non-federal entities as a condition of receiving funds administered by the Department of Transportation or other federal agencies. Prior to ordering, please visit www.signify.com/baa to view a current list of BAA-compliant products to confirm this product’s current compliance.